Inserting The Memory Card - Canon PowerShot SX100 IS User Manual
Canon powershot sx100 is camera user guide
Hide thumbs
Also See for PowerShot SX100 IS:
- User manual (412 pages) ,
- Getting started manual (38 pages) ,
- Software manual (60 pages)
Table of Contents
Advertisement
10
Preparations
Inserting the Memory Card
1.
Slide the battery cover lock (a) and hold it open while
sliding the cover (b) and opening it (c).
Battery Cover Lock
a
2.
Insert the memory card until it clicks into place.
Slide the cover.
b
Back
Write Protect Tab
Example:
SD memory card
Open the cover.
c
• Confirm that the
write protect tab is
unlocked (only SD
memory cards).
• Check the memory
card for the correct
orientation.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PowerShot SX100 IS and is the answer not in the manual?
Questions and answers
I have not used the camera for some time. I cannot get the date and time to hold. When I turn the camera on it goes back to setting the date and time.
The Canon PowerShot SX100 IS resets the date and time every time it is turned on likely because the internal backup battery (C1220) is not functioning properly. Even though it was replaced, the issue may persist if the new battery is not installed correctly, is not charged, or the camera has an internal fault preventing it from retaining settings.
This answer is automatically generated