Advertisement
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for ROVE L3510 Pro
- Page 1 Robotic Vacuum User Manual L3510 from APPLIED SCIENCE...
-
Page 2: Table Of Contents
C O N T E N T S SAFETY INFORMATION.............................1 PRODUCT INTRODUCTION..........................5 INSTALLATION INSTRUCTION…………........................8 ROUTINE MAINTENANCE ............................13 PRODUCT SPECIFICATIONS..........................16 TROUBLESHOOTING GUIDE..........................17 COMMON PROBLEMS............................19 WARRANTY................................20... - Page 3 SAFETY INFOMRATION Usage Limitations • The product is used for floor cleaning in home environment ONLY a n d cannot b e used for outdoor, non-ground surfaces (such a s sofa) a n d commercial/industrial environment. • Please do not operate the product wh en t h e temperature is below 32°F or above 100°F, wet surfaces o r over sticky substances on the ground.
-
Page 4: Safety Information
SAFETY INFORMATION 1. This device is only to be used with the power supply unit provided with it. 2. The adapter must be removed from the socket-outlet before cleaning or maintaining the device. 3. This device contains batteries that are only replaceable by skilled persons. 4. - Page 5 SAFTETY INFORMATION Disposal Instructions • The following information is only applicable to the disposal of this device, not its daily use. • The chemical substances contained in the battery will pollute the environment. Before disposing of this product, remove the battery from it a n d take it to a professional recycling station.
- Page 6 WARNING ! This symbol means that according to local laws a n d regulations your product and/or its battery shall b e disposed of separately from household waste. When this product reaches the end of its life, the user has the choice to give this product to a competent recycling organization.
-
Page 7: Product Introduction
PRODUCT INTRODUCTION WHAT’S INCLUDED Charging Base x 1 Adapter x 1 Left Side brush x 1 Right Side brush x 1 HEPA Filter x 1 + Sponge Foam Filter x 1 Cleaning Brush x 1 Dust Box x 1... - Page 8 PRODUCT INTRODUCTION Robot Vacuum Filter Cover TOF Wall Sensor Dust Bin Release Button Cliff Sensor Charging Contact LiDAR Module LiDAR Collision Omnidirectional Wheel Right Side Brush Detection Sensor Left Side Brush Charging Base Primary Wheel Detection Sensor Main Brush Main Brush Cover Buckle Obstacle Detection Bumper Sensor...
- Page 9 PRODUCT INTRODUCTION Robot Vacuum On/Off/Clean/Pause Button Indicator Light • Press once to start/pause cleaning • White: Connected to Wi-Fi • Press and hold for 3 seconds to turn the • Orange: Not connected to Wi-Fi device on/off • Red: Error or low battery •...
-
Page 10: Installation Instruction
INSTALLATION INSTRUCTION 3. Install the Side Brushes 1. Connect the adaptor power cable with the charging base, an d then place any excess cable into the charging base’s Align the left and right brushes with the corresponding markings on inner compartment. the bottom cover of the device. - Page 11 (Press a n y key during c le a n in g to p a u se c le a n in g) Note: • ROVE robot vacuum CANNOT be used to cleanup liquids. • If the battery level is lower than 20%, the device will not be able to perform cleaning. Please charge the device before cleaning.
- Page 12 USAGE INSTRUCTION CUSTOM CLEANING AREA SPOT CLEANING MODE Users can use the mobile a p p to create the desired size a nd location Users can select the desired area on the mobile app to deep clean a of the cleaning area(s).The vacuum will start cleaning the selected area specified location.
- Page 13 USAGE INSTRUCTION Wi-Fi RESET If the cell phone cannot be connected to the robot vacuum due to change of router configuration / password or any other reasons, please reset the Wi-Fi. Press and hold the key and key simultaneously for 3 seconds. “Wi-Fi has been reset”...
-
Page 14: Routine Maintenance
ROUTINE MAINTENANECE Main Brush Side Brush 1. Flip over the device. Press the buckle on the main brush cover to 1. Flip over the device a nd pull out the side brushes vertically. take out the main brush. 2. Reinstall the brushes after removing any trapped debris a nd dirt. 2. - Page 15 ROUTINE MAINTENANECE Filters Dust Bin 1. After a long period of use, remove the Net Filter, Sponge Foam Filter and HEPA Filter. 1. Press a nd hold the dust bin release button, t he n pull o ut the 2. Rinse the removed filters and dust bin under a tap. dust bin as shown below.
- Page 16 ROUTINE MAINTENANECE Sensors (Regular Clean) Use a soft, dry cloth to wipe all the sensors on the device, including the following: 1. The TOF Wall Sensor on the right of the vacuum 2. The Cliff Sensor on the bottom of the vacuum 3.
- Page 17 PRODUCT PARAMETERS Vacuum Robot Product Name Rove Pro L3510 Laser Navigation Robot Vacuum Cleaner Model R o v e P r o L 3 5 1 0 Dimensions 350x350x100 mm Weight 3.3 kg Battery 2600mAh Lithium Battery Input Voltage 14.4V...
-
Page 18: Troubleshooting Guide
TROUBLESHOOTING GUIDE ERROR CODE Solution Error 1: Dust bin removed. The device was started without a dust bin. Reattach the dust bin and start the device again. The top radar sensor has been blocked or the device was placed in an outdoor area. Error 2: Top sensor m ay be blocked. - Page 19 TROUBLESHOOTING GUIDE SOLUTION ERROR CODE Error 9: Robot blocked. Restart in new position. Move the d ev ic e to a level surface, then restart it. Error 10: Robot inclined. Restart in level surface. T h e d ev ic e is off the ground. Move the d ev ic e to a level surface, then restart it. T h e d rivin g w heel is stuck.
-
Page 20: Common Problems
COMMON PROBLEMS Problem Type Solution • The battery is low. P lace the device on the charging b a s e a n d align its charging contact onto the charging base power charging pins. The device should automatically turn on. If the device i s out of power, it m a y take some time to turn on. C annot b e started •... -
Page 21: Warranty
What is covered in my warranty? 1. The original unit and/or non-wearable components deemed defective, in ROVE ’s sole discretion, will be repaired or replaced for up to 1 year from the original purchase date. 2. In the rare event that a replacement unit is issued, the warranty coverage ends six months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is greater. - Page 22 FCC Compliance Statement §15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. §15.21 Information to user.
- Page 23 Smart Robotic Vacuums L3510G1B1...
Need help?
Do you have a question about the L3510 Pro and is the answer not in the manual?
Questions and answers