Instructions For Menu Setting - Crosstour CR750 Manual

Instructions for menusetup
Video recording settings
After being powered on, it enters the video mode and automatically starts recording.
Short press OK Button to stop recording. Short press M Button again to switch to
video recording settings. The screen displays the settings such as: resolution,
dual-lens recording, loop recording, time-lapse recording; page down: WDR, GPS
Stamp, speed unit, exposure; page down: motion detection, audio on/off, date
stamp, G-sensor; page down: parking guard. Short press Up/Down Button to switch
to a setting option. Short press OK Button to select the option. Short press Up/Down
Button to modify the option. Short press the OK Button to confirm the option.
Resolution
Dual video: 1080P 1440x1080 /720P 1280x720
Single video: 1080 FHD 1920x1080/720P 1280x720/WVGA 848x480/ VGA 640x480
Dual-lens Recording: When the function is turned on, the camera will record both
the front and rear cameras at the same time. On/off, default value: on.
Loop Recording: The cam will cyclically record new videos under the time interval
you set. off / one minute / three minutes / five minutes, default value: three
minutes
Time-lapse Recording: off /100ms/200ms/500ms, default value: off
WDR: on/off, default value: off.
GPS stamp: on/off, default value: off.
Speed unit: KM/H/MPH, default value: KM/H.
Exposure:"+2.0","+5/3","+4/3","+1.0","+2/3","+1/3","+0.0","-1/3","-2/3","-1.0",
"-4/3","-5/3","-2.0" (default exposure value is 0.0)
Motion detection: on/off, default value: off. It starts recording once there is a
change in the frame, otherwise it stops recording. It automatically stops recording
10s after no dynamic picture appears.
Audio on/off: Choose to record audio or not in the video. on/off, default value: on.
7