Mitsubishi Electric LT-37131 Service Manual page 23

TV Chassis Assembly Removal
1. Remove the Wall Mounts (3 screws each).
2. From the PWB-POWER, remove connectors PF & PD and AC Power Cord PS.
3. From the PWB-SIGNAL, remove connectors AT, AN, CE & LE from the bottom. Disconnect ES from the right
side and remove the cable from the wire clamps.
4. From the PWB-DM, remove connectors VR & VT (37") and the Ground Screw(s) (B).
5. From the TV Chassis Mounting Plate, remove 6 Screws (C).
6. Lift the complete TV Chassis Assembly up and off the LCD Panel Assembly.
GROUND
SCREWS (B)
SCREW (C)
SCREW (C)
MODELS: LT-37131 / LT-37132 / LT-46131 / LT-46231
VR & VT (37" Only)
PWB-DM (Top View)
AT, AN, CE, LE
WALL MOUNT
BRACKETS
(3 Screws Each)
TV CHASSIS
ASSEMBLY
ES
PS
WIRE CLAMPS
Page 23
PD & PF SCREW (C)
SCREW (C)