Softing CAN-AC 104 Series Hardware User Manual

Table of Contents

Download this manual

CAN-ACx-104

Hardware User Manual

Part number: CAN-AC1-104 (single CAN channel)

Part number: CAN-AC2-104 (dual CAN channel)

Part number: CAN-AC2-104I (dual CAN channel, extended temperature)

Information in this document is subject to change without notice.

Softing Industrial Automation GmbH

Richard-Reitzner-Allee 6

D-85540 Haar

Tel.: (++49) 89/4 56 56-0

Fax.: (++49) 89/4 56 56-399

http://www.softing.com

V1.02.01

Table of Contents

Need help?

Do you have a question about the CAN-AC 104 Series and is the answer not in the manual?

Page 1 Hardware User Manual Part number: CAN-AC1-104 (single CAN channel) Part number: CAN-AC2-104 (dual CAN channel) Part number: CAN-AC2-104I (dual CAN channel, extended temperature) © Copyright Softing Industrial Automation GmbH, Munich Germany Information in this document is subject to change without notice. V1.02.01...
Page 2 Windows 7, XP or 2000 installed 1.2 Software installation The CAN-ACx-104 software is part of the “CAN Drivers and Software” CD which is also available from the download section at www.softing.com. • Insert the CD in your PC’s CD/DVD drive.
Page 3 1.4 Driver configuration CAN-ACx-104 needs to be added to the runtime configuration, by the following steps. • Click Start – All Programs – Softing CAN – Runtime System Configuration – Softing CAN Interface Manager • Select the CAN-ACx-104 branch of the tree view at the left side and click Add.
Page 4 • Immunity: EN61000-6-2 Generic Immunity Standard (industrial environments) A "Declaration of Conformity" in accordance with the above standards has been made and is filed at Softing Industrial Automation GmbH, Germany. NOTE: • To satisfy the EMC requirements, the equipment used (PC, monitor, CAN stations, etc.) also has to meet the EMC requirements.

Can-ac1-104Can-ac2-104Can-ac2-104i