Table of Contents
Advertisement
Installation
Installing the downdraft extractor
The downdraft extractor can be
installed with the connector for the air
duct on either the right or the left-hand
side.
a Connector for air duct on the right
b Connector for air duct on the left
Stick the supplied sealing strip under
the edge of the cover. Do not apply
the sealing strip under tension.
Fit the clips onto the spacer bars.
Guide the control cable downwards
between the spacer bars.
Fit the cover onto the spacer bars.
48
Remove the drip tray from the casing.
Fasten the casing from the inside with
the screws on the right and left
sides (3 in each case).
Fasten the drip tray.
Advertisement
Table of Contents
