How To Operate Projector; Simplink (Hdmi-Cec); Using Simplink - LG MiniBeam PF1500W Owner's Manual

HOW TO OPERATE PROJECTOR

SIMPLINK (HDMI-CEC)

Using SIMPLINK

You can conveniently control and use various multimedia devices connected
through HDMI with the projector's remote control.
1
Connect the SIMPLINK HDMI Output port to the projector's HDMI IN port with
an HDMI cable.
2
(Q. Settings) button on the remote control and select
Press the
General SIMPLINK
3
Set SIMPLINK (HDMI-CEC)
4
Configure the Auto Power Sync
is set to On, turning on a SIMPLINK-linked device will turn the projector on.
When you turn off the projector, the device will also be turned off.)
5
Turn on the connected device. When the projector automatically connects to
the device, the input will switch. If the device is not automatically connected to
the projector, click the
•
This feature works only with devices with the
SIMPLINK logo on the external device. There may be a problem using the device
if the device does not meet the required specifications.
•
A high-speed HDMI
is required to use SIMPLINK. Pin 13 of the high-speed HDMI
data transfer between devices.
• If you want to output sound to the external audio equipment connected through
the HDMI cable, set
(HDMI-CEC).
to On.
settings to
(INPUT) button.
cable with CEC (Consumer Electronics Control) function
®
SIMPLINK (HDMI-CEC)
On or Off. (If Auto Power Sync
logo. Check for the
cable is used for
®
to On.
11