Download Print this page
Sealey LED3605RA Instructions

Sealey LED3605RA Instructions

Advertisement

Quick Links

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
instructions
1. safety
inspect the cable and connector for wear and damage to ensure items are safe before connecting to the power supply. if worn or
9
damaged do not use.
ensure the lamp is fully charged before initial use.
9
do not charge in damp conditions.
8
do not turn the lamp on when it is being charged.
8
do not shine directly into your, another person's or an animal's eyes.
8
do not allow children to use the lamp.
8
do not handle or move the lamp whilst it is being charged.
8
do not use the lamp if you suspect that the battery or the lamp casing is damaged.
8
do not leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequently
8
recharge the battery at least once every six months of non-use.
do not attempt to open, disassemble, modify or service the battery pack.
8
do not crush, puncture, short external contacts or dispose of in fire or water.
8
do not expose to temperatures above 60°c (140°).
8
replace only with the battery pack designated for this product.
9
recycle or dispose of used battery as stipulated by local regulation.
9
if the electrolyte in the cells gets on your skin, thoroughly wash with soap and water. if it gets in your eyes, rinse thoroughly with cool
9
water and seek immediate medical attention.
2. introductions
unique and innovative 360° swivel and tilt function enables light source to be positioned in any direction. exclusive patented design owned and
registered to sealey. each lamp houses 8 super bright smd leds providing up to 300 lumen output with 120° spread of light, illuminating the whole
work area. includes an additional 1W led directional torch. features a fold out swivel hook on the back of the light and a super strong magnet,
which allows hands free operation. High quality 2.2Ah lithium-ion battery for longer life, no memory effect and a much slower discharge than
traditional ni-mH batteries. micro usB charging port. supplied in limited edition 40th anniversary box..
3. specification
model no .............................................................led3605rA
Battery ........................................................3.7V 2.2Ah li-ion
led Quantity ................................................. 8 smd + 1 led
lumen output side(High/low)top ............... (300/150)/100lm
operating time side(High/low)/top .....................(3.5/8)/10hr
charging time ................................................................3.5hr
iP rating .........................................................................iP54
minimum length ......................................................... 235mm
maximum length ........................................................ 255mm
The battery fitted to this lamp is considered to be a consumable item and its ability to accept a charge will reduce over time.
We will provide warranty against mechanical and electrical defect for a period of one year - this does not cover fair wear and tear.
If the battery is not properly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances
we will not replace the battery regardless of whether it is less than one year old.
note: the lithium battery does not suffer from memory effect and once fully charged may be stored for up to six months without
another charge.
© Jack sealey limited
instructions for
rechargeable 360° 8 smd + 1w led midi inspection
lamp red 40th anniversary lithium-ion
led3605ra
model no:
Original Language Version
led3605rA | issue:1 19/10/17

Advertisement

loading

Summary of Contents for Sealey LED3605RA

  • Page 1 360° swivel and tilt function enables light source to be positioned in any direction. exclusive patented design owned and registered to sealey. each lamp houses 8 super bright smd leds providing up to 300 lumen output with 120° spread of light, illuminating the whole work area.
  • Page 2 6 screws to remove the rear cover. remove the 4 screws to undo the battery pack cover and remove the battery wires. under the Waste Batteries and Accumulators regulations 2009, Jack sealey ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme.