Advertisement
Advertisement
Table of Contents
Related Manuals for Haier AG10AA1TAA
Summary of Contents for Haier AG10AA1TAA
- Page 1 Dehumidifier Model: AG10AA1TAA AG12AA1TAA dehumidifier.
-
Page 2: Table Of Contents
Contents Safety information ..............2 Common Questions ..............3 Installation ................4 Components ................5 Control panel ................6 Operation ................7 Drainage .................. 8 Maintenance ................9 Trouble shooting ..............10 Specification ................11... -
Page 3: Safety Information
SAFETY INFORMATION Please read the operating instructions carefully before using your dehumidifier for the first time and keep it on a safe floor. Never immerse the appliance in water or other liquids. Place the unit on a stable flat surface to avoid loud noises and vibrations. Never operate the appliance if a cable or connector has been damaged, after appliance malfunction or if the appliance was dropped or otherwise damaged. -
Page 4: Common Questions
Common Questions Q: Why drainage water is less in winter? In winter, temperature is low, but air is dryer compared with air in summer, please note that it is not a fault. Q: Why the dehumidifier doesn’t work or stop working suddenly. Maybe the water tank is full or water tank is not well-installed, if yes, pour away the water and install the water-tank in a correct way. -
Page 5: Installation
Installation Empty the water tank before turn on the unit. During the operation, keep unit closed to the door and windows closed to save energy. Make sure no block at air inlet and outlet Put the unit is stably laid on as the following photo. (At least 20cm from the front/back or the left/right, and at least 50cm from the top.) -
Page 6: Components
Components: Front: Control panel Water Tank Filter Back: Handle Air Outlet Continuous Drainage Mouth Wires Hook... -
Page 7: Control Panel
Control panel Timer: 24 hours timing, press the key, to set the timing off or timing on, timing range is from 1 to 24hours, it will increase 1hour by each press. Press the key again, timing can be canceled. Internal drying function: press the key to start the inside drying function. Fan: In Auto dehumidifying and cloth dry mode, press this button to change fan speed, high-low-high. -
Page 8: Operation
Operation Timing off When unit is working, press “Timer” to start the function, then press “Humidity setting” button to set hours, timing range is from 1 to 24hours, it will increase 1 hour by each press. When time is up to your setting, unit will turn off. After setting, timer button flashes 5 time for confirmation. Timing on When unit is power on, press “Timer ”... -
Page 9: Drainage
Drainage Drainage manually When water tank is full, water-full indicator is on, the unit will stop working, and buzzer will sound 10times till water is pour off. Take out water tank, pour away water Replace the water tank, dehumidifier restarts working. Please install the water tank as the following photo. -
Page 10: Maintenance
Maintenance Notice: ⚫ Turn off this appliance and pull out plug before maintaining or repairing. ⚫ Pull out plug if dehumidifier is not used for long time ⚫ Please do not use benzene, alcohol, gasoline or other chemical reagent to clean unit. ⚫... -
Page 11: Trouble Shooting
Trouble shooting Troubles Possible reasons Resolution Is the power plug connected? Put the plug in the socket. Pour away the water in Water tank is full or water tank is water-tank, and put water not assembled well. tank into the unit. Unit doesn’t work Use this dehumidifier under Operation temperature is too low... -
Page 12: Specification
Specification Model YDZ-10D 220-240V/50H Voltage Dehumidifyin capacity 10L/day (30 ℃ ,RH80 Rated 240W power Water tank 1.8L Net weight 9.5kg Size (mm) (length*dept x416 h*height)