MitraStar HGW-2501GN-R2 User Manual page 43

Table 4 Network Setting > WAN: Edit (continued)
LABEL DESCRIPTION
IPv6 Default Enter the default gateway.
Gateway
IPv6 DNS Server1 Enter the first IPv6 DNS server address.
IPv6 DNS Server2 Enter the second IPv6 DNS server address.
DHCP IPv6 This is available only when you select Obtain an IP Address Automatically.
Select DHCP to obtain an IPv6 address from a DHCPv6 server. Select SLAAC to have the
Router use the prefix to automatically generate a unique IP address that does not need to be
maintained by a DHCP server.
DHCP PD This is available only when you select Obtain an IP Address Automatically.
Select Enable to use DHCP PD (Prefix Delegation) to allow the Router to pass the IPv6 prefix
information to its LAN hosts. The hosts can then use the prefix to generate their IPv6
addresses.
NAT SUA Only is available only when you select Router in the Mode field.
Select SUA Only if you have one public IP address and want to use NAT.
Select Full Feature if you have multiple public WAN IP addresses for your Router.
Select None to disable NAT.
Mapping Set If you select Full Feature in the NAT field, select the NAT address mapping set of local IP
addresses to map to this interface's IP address.
Advanced Setup Click this to display or hide RIP and multicast and MTU fields.
RIP Direction Select the RIP Direction from None, Both, In Only and Out Only.
RIP Version This field is not configurable if you select None in the RIP Direction field.
Select the RIP version from RIP-1 and RIP2-B/RIP2-M.
Multicast The Router supports IGMP-v1, IGMP-v2 and IGMP-v3. Select None to disable it.
MTU Enter the MTU for this WAN interface in this field.
Chapter 6 WAN 43