Display And Control Panel Buttons; Test Results; Diagnostic Test Modes; Run Once - Kurzweil CUP2 Service Manual

Diagnostics
Entering Diagnostics

Display and Control Panel Buttons

In the Diagnostics menu, the display shows the currently selected test, test modes, actions, and

test results.

Press the Record and Play/Stop buttons to navigate through the available tests. To select a test,
press the Next button. Press the Record or Play/Stop button to select the Test Mode:

Loop

processing,
Some tests have additional test options. In this case, use the Record and Play/Stop buttons to
navigate through the available test options, press the Next button to choose the option and run
the test. To return to the previous menu or option, press the Previous button.
To return to the Boot Loader, press the Previous button.
Test Results
At the completion of an individual test, the display shows the results of the test; the test name
and
may scroll across the display. Use the Record and Play/Stop buttons to review each line of test
results.

Diagnostic Test Modes

Run Once

The
selected in the display, press the Next button to select and run the test once.
At the completion of a test, whether pass or fail, press the Previous button to exit the test and
return to the Diagnostics menu.
To exit the Diagnostics menu, press the Previous button to return to the Boot Loader.
Loop
Loop
tests performed in the run eld (
the fail eld, (
Loop

Continuous

Continuous
selected test until you press the Previous button.
3- 2
Continuous
or . Then press the Next button to begin the test. While some tests are
Running...
scrolls across the LED display.
OK
for a passed test or
Run Once
test mode allows you to select and run an individual test. With
continuously runs an individual test. The display continuously displays the number of
fail:#
).
stops if a failure is detected.
is the same as
ER
for a failed test. When a test fails, additional lines of test results
Run:#
), and displays the number of failed tests performed in
Loop
, but does not stop if a failure is detected.
Once
,
Run Once
Continuous
runs the