Connecting to wireless LAN using
the wireless LAN access point
For setting and operations, see "When
Simple Mode is not Used" on page 10.
Wireless LAN module
(supplied)
Access point*
LAN
* The available access point is the
IEEE802.11b applicable product.
Note
For a LAN connection, consult the network
administrator.
8
Wireless Connection
Projector
Computer
Computer
When Simple Mode is Used
Setting the projector
1
Insert the supplied wireless LAN card
into the slot of the projector.
For details, see page 5.
2
Turn on the projector.
3
Press the AIR SHOT key on the
remote commander.
The home display of Air Shot appears.
Check that [Simple Mode] is set to [On].
If Simple Mode is not set to [On]
See steps 4 and 5 of "When Simple Mode is
not Used" on page 10 and set it to [On].
To change the network channel for
Simple Mode
When the communication is poor, change
the network channel.
The default setting is [11]. See steps 4 and
5 of "When Simple Mode is not Used" on
page 10 and set [Network Channel] to
another channel. The channel is selected
from among 1 to 11.
Notes
• If the USB wireless LAN module is
connected to the computer, remove it before
setting.
• You may not be able to use some channels
according to the country/region.