Table of Contents
Advertisement
Displaying the clip information
You can display detailed information about clips on the screen, and check it.
1
Display the thumbnail display screen.
With cross cursor operation, move the
cursor to the target clip.
Press [MENU/MODE CHK].
Using
and
, select "PROPERTY", and
press
.
5
Select "CLIP PROPERTY" on the sub-menu
displayed, and press
Information on the target clip now appears on the
screen.
2)
3)
4)
1) Information added to clips (Page )
The indicators or numbers of text memos or
voice memos, which have been added into
clips, are displayed. In addition, when a P2 card
on which clips have been recorded has been
write-protected, the
•
Voice memo indicator
V
This is displayed on clips to which voice memos
have been added. It appears only in the clip
property mode.
•
Voice memos cannot be recorded or played back
using this unit.
) Clip number
) Thumbnail
.
1)
5)
mark is displayed.
) Clip information
The following information is displayed.
CLIP NAME:
The filename of the clip as
recorded on the P2 card
START TC:
Time code when recording was
started
START UB:
User's bit when recording was
started
DATE:
Date on which the clip was
recorded
TIME:
Time at which the clip was
recorded
DURATION:
Length of the clip
V_FORMAT:
Recording format of the clip
FRAME RATE: Playback frame rate
REC RATE:
Recording frame rate (displayed
for clips specially recorded by
the camera recorder (i.e. VFR
recording))
When
or
is pressed, the information of the
previous or next clip is displayed.
5) Clip meta-data
Items for referencing the detailed information
on the clips (clip meta-data) are displayed.
(Continued on the next page)
Advertisement
Table of Contents
