Wireless Connection Configuration - AEG T9DEN87CC User Manual

WI-FI - CONNECTIVITY SETUP
If a programme is running, the App notifies that the update will start
at the end of the programme.
During the update, the appliance shows
The appliance will usable again at the end of the update, without
any notification about successful update.
If an error occurs, the appliance shows
press any buttons or turn the knob to return to normal use.

5.3 Wireless connection configuration

Before you begin configuration download and install My AEG
application on your smart device.
1. In the App - tap on Add appliance and follow the instructions on
the App for appliance connection.
2. Push the Aan/Uit button to switch on the appliance.
3. Wait approximately 8 seconds.
4. Touch and hold the Opfrissen and Startuitstel buttons
simultaneously for a few seconds until a 'click' sound is heard.
The symbols:
only flashing symbol:
around 1 minute. When ready the symbol:
appears on the display. Access Point is open for around 3
minutes.
5. Configure My AEG application on your smart device.
If the configuration is successful the symbol:
disappears and the symbol:
Each time you switch the appliance on, the appliance attempt to
connect to the network automatically. When the connection is
established the symbol:
18/64
and appear on the display. After few seconds
remains. Wireless module is activating for
stops flashing.
stops flashing.
in the display.
in the display: just
(Access Point)
(Access Point)