Proximity Sensor (Motionreact); Safety - Miele H 7880 BPX Operating And Installation Instructions

Settings

Proximity sensor (MotionReact)

The proximity sensor detects when you
approach the touch display, e.g., with
your hand or body.
If you want the proximity sensor to
respond even when the oven is turned
off, select the Display
On setting.
Switch the light on
- during cooking program
As soon as you approach the touch
display during a cooking process, the
oven interior lighting turns on. The
oven interior lighting automatically
turns off again after 15 seconds.
-
always on
As soon as you approach the touch
display, the oven interior lighting
turns on. The oven interior lighting
automatically turns off again after
15 seconds.
- Off
The proximity sensor does not
respond when you approach the
touch display. Press the Light sensor
button to turn the oven interior
lighting on for 15 seconds.
Switch the appliance on
-
On
If the time is displayed, the oven
willturn on and the main menu will
appear as you approach the touch
display.
- Off
The proximity sensor does not
respond when you approach the
touch display. Turn the oven on using
the  On/Off button.
42
| QuickTouch |
Acknowledge buzzer
- On
As soon as you approach the touch
display, the audible signals turn off.
-
Off
The proximity sensor does not
respond when you approach the
touch display. Turn the audible
signals off manually.

Safety

System Lock 
The system lock prevents the oven from
being turned on inadvertently.
You can still set an alarm and a timer,
as well as use the MobileStart function
when the system lock is active.
The system lock will remain activated
even after a power failure.
- On
The system lock is now active. If you
want to use the oven, touch  for at
least 6 seconds.
-
Off
The system lock is now deactivated.
You can use the oven as normal.
Sensor Lock
The sensor lock prevents the cooking
program from being turned off by
mistake or settings from being changed.
Once activated, the sensor lock prevents
the sensor buttons and fields on the
display from working for a few seconds
after a program has been started, with
the exception of the  On/Off button.