Getting Started; Select The Display Language And Cancel The Demonstration; Set The Clock And Date; Set The Initial Settings - Kenwood KDC-220UI Instruction Manual

GETTING STARTED

1

Select the display language and cancel the demonstration

When you turn on the power (or after you reset the unit), the display
shows: "SEL LANGUAGE" "PRESS" "VOLUME KNOB"
1 Turn the volume knob to select the display language, then press
the knob.
Selectable display language:
/ /
: [EN] (English)/[RU] (Russian)/[TU] (Turkish)/[SP] (Spanish)
[ENG]/[EN] is selected for the initial setup.
Then, the display shows: "CANCEL DEMO" "PRESS" "VOLUME
KNOB".
2
Press the volume knob.
[YES] is selected for the initial setup.
3
Press the volume knob again.
"DEMO OFF" appears.
2

Set the clock and date

1 Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock
3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Hour Minute
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6
Turn the volume knob to select [12H] or [24H], then press the knob.
4 ENGLISH
JS_KWD_KDC_220UI_MN_EN_3.indd 4 JS_KWD_KDC_220UI_MN_EN_3.indd 4
To set the date
7
8
9
10
11
To return to the previous setting item, press
1
2
: [ENG] (English)/[TUR] (Turkish)
3
4
5
To return to the previous setting item, press
AUDIO CONTROL
SWITCH PREOUT REAR/SUBWOOFER or REAR/SUB-W: Selects whether rear speakers or
SP SELECT
Turn the volume knob to select [DATE FORMAT], then press the knob.
Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press
the knob.
Turn the volume knob to select [DATE SET], then press the knob.
Turn the volume knob to make the settings, then press the knob.
Day Month Year or Month Day Year
Press and hold to exit.
3

Set the initial settings

Press repeatedly to enter STANDBY.
Press the volume knob to enter [FUNCTION].
• Pressing AUD enters [AUDIO CONTROL] directly.
Turn the volume knob to select an item (see the following table),
then press the knob.
Repeat step 3 until the desired item is selected or activated.
Press and hold to exit.
a subwoofer are connected to the line out terminals on the rear (through
an external amplifier). ( 21, 22)
OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches
or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum
performance.
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
.
.
Default: XX
6/14/2017 8:59:27 AM 6/14/2017 8:59:27 AM