Fractal MFC-101 MARK III Firmware Release Notes

Hide thumbs Also See for MFC-101 MARK III:

Table of Contents

Download this manual

MFC-101 MARK III FIRMWARE RELEASE NOTES

The MFC-101 Mark III firmware file is not interchangeable with that for the original or Mark II.

Please ensure that you have selected the correct item from within the firmware zip file.

Release 3.09

Mar 13, 2017

1. Fixed a bug that could cause expression pedals to "wrap" from 000 to 127 in the heel-down position.

Table of Contents

Need help?

Do you have a question about the MFC-101 MARK III and is the answer not in the manual?

Page 1 MFC-101 MARK III FIRMWARE RELEASE NOTES The MFC-101 Mark III firmware file is not interchangeable with that for the original or Mark II. Please ensure that you have selected the correct item from within the firmware zip file. Release 3.09 Mar 13, 2017 1. Fixed a bug that could cause expression pedals to “wrap” from 000 to 127 in the heel-down position.
Page 2 Oct 31, 2014 ------------------------------------------------- The MFC-101 Mark III now allows you to move the preset switch range to anywhere on the board by designating the FirstPresetSwitch. All switches below the first preset switche will be Instant Access Switches. With this, you can move the 5 default preset switches to row 2 or row 3 and use the lower rows for instant access.
Page 3 MFC after updating. - Added FASLINK support for the MFC-101 Mark III. Be sure to select the correct PORT in the MIDI menu of the MFC after updating. Please also note that if you’re using an Axe-Fx II XL, you must also select the desired MFC port (“EtherCON”...