Installing The Web Camera Driver - Panasonic SDR-S100 Operating Instructions Manual

Installing the Web Camera Driver

≥ Before attempting to start up the CD launcher, close all other software applications
which are running.
≥ Install the driver if you are using Windows XP SP1 or Windows 2000 SP4. (With
Windows XP SP2, the driver does not need to be installed because the Web camera
is run using the operating system's standard driver.)
≥ If you are using Windows XP, installation may take some time depending on the
environment.
Before proceeding with the installation, do not connect the USB cable. If you
connect the USB cable, you will not be able to install the Web camera driver
properly.
1
2
3
78
VQT0T50
Insert the CD-ROM into the PC.
The CD launcher starts.
(Refer to page 79 if the CD launcher fails to
start automatically after the CD-ROM has been
inserted into the PC.)
Click [Web Camera Driver].
≥ The software application may not run properly
if you cancel the installation at any point e.g.
by pressing [Cancel].
Click [Next].