Printer Initialization; Buzzer Operation - Epson DFX-5000+ Service Manual

Printer Initialization

The printer is initialized in the following cases:
Initialization performs the following functions:
memory.
The top of form (TOF) position is reset by the following:

Buzzer Operation

The buzzer sounds for approximately 0.1 second when a BEL code (07H) is input.
Buzzer beeps indicate printer status, as shown below. Each asterisk (*) represents
one 0.1 second beep.
The ESC BEL command (07H) is input.
A carriage error is detected due to:
Low insulation resistance (less than 1 KW).
A paper out or paper jam is detected.
(The printer runs out ofpaper or a paper jam
occurs during paper feeding or printing.)
Another paper error is detected:
(The previous print job is not torn off.)
(The paper is out at power on.)
EPSON DFX-5000+ Service Manual
Product Description
* (1 beep)
***-*** (2 sets of 3 beeps)
(5 sets of 4 beeps)
*** (3 beeps)
1-29