Step 2 Plug-In Auto Tuning - Panasonic DMR-E75VS Operating Instructions Manual

Before Use

STEP 2 Plug-in Auto Tuning

DVD/VHS POWER
Í
INPUT SELECT
DVD/VHS
OUTPUT
OUTPUT
DIRECT NAVIGATOR
TOP MENU
3, 4, 2, 1
ENTER
SUB MENU
PROG/CHECK
After plugging the unit into your household AC outlet and pressing
[Í, DVD/VHS POWER] to turn the unit on for the first time, the unit
assists you to set the on-screen language, and automatically tunes in
all the channels it can receive and sets the clock.
The unit automatically determines the type of transmission (airwaves
or cable) and puts them into channels as follows.
Band
VHF
TV Mode
(Airwaves)
UHF
VHF
CATV LOW BAND
CATV MID/SUPER BAND
CATV Mode
CATV HYPER BAND
(Cable)
ULTRA BAND
SPECIAL CATV CHANNEL
Preparation
≥Turn on the TV and select the appropriate video input to suit the
connections to this unit.
≥If you connect the unit through a cable TV box or satellite receiver
(l 11), tune to your local PBS for "Auto Clock Setting" to work.
If there is no local PBS, set the clock manually (l 46, "Manual
Clock Setting").
≥Press [DVD].
[1]
Press [Í, DVD/VHS POWER].
Seleccione la Lengua
Sélection de Langue
Appuyer sur ENTER
Use [3, 4] to select the language and press
[2]
[ENTER].
TV
POWER
VOLUME
CH
TV/VIDEO
DVD
VHS DVD
TRACKING/V-LOCK
PLAY
FUNCTIONS
AUDIO FUNCTIONS
VHS MENU
RETURN
DISPLAY STATUS TIME SLIP
Channel
2–13
14–69
2–13
95–99
14–36
37–65
66–94
100–125
Select Language
English
Español
Français
Press ENTER
Pulse ENTER
[3]
Press [ENTER] to start Plug-in Auto Tuning.
The unit then proceeds with Auto Clock Setting. The time is
displayed when finished.
≥DST, Daylight Saving Time, shows the summertime setting.
≥TIME ZONE shows the time difference from Greenwich mean
time (GMT).
EST (Eastern Standard Time) l GMT j5
CST (Central Standard Time)
MST (Mountain Standard Time) l GMT j7
PST (Pacific Standard Time)
AST (Alaska Standard Time)
HST (Hawaii Standard Time)
For other areas: xx hr
[4]
Press [ENTER].
∫ If the clock is an hour slower or faster than the actual
time
Select "j1" or "i1" in "Time Zone Adjust" in the SETUP menu
(l 46).
1
∫ If the unit couldn't set the clock automatically
Set the time manually (l 46, "Manual Clock Setting").
∫ To start Plug-in Auto Tuning again (after relocation, for
example)
Antenna system, channel caption, and guide channel
settings for VCR Plusi system all revert to the default
values when you perform the procedure below. Timer
recording settings are also cleared.
When the unit is on and stopped
[1] Press and hold [CH, W] and [CH, X] on DVD of the main unit for
about 5 seconds.
The unit turns off.
[2]
Press [Í, DVD/VHS POWER] to turn the unit on.
13
Auto Channel Setting
1
CH.
Auto Channel Setting
Proceeding . . .
1 1 1
Auto Clock Setting
Auto Clock Setting is complete.
4/4/2004 12:15 AM
DST............. ON
TIME ZONE.... CST
l GMT j6
l GMT j8
l GMT j9
l GMT j10