Advanced Scheduled Recording; To Cancel A Scheduled Recording In Progress; Check, Change, Or Delete Programs; To Release The Unit From Recording Standby (Before Recording Starts) - Panasonic DMR-EA18K Operating Instructions Manual

Advanced Scheduled Recording

To cancel a scheduled recording in
progress
to select the DVD drive.
– Confirmation screen appears.
w to select "Stop recording", then
Notes
Recording stops and 'one-time' programs are deleted from the Schedule
List. Programs scheduled to record 'Daily' and 'Weekly' remain on the
Schedule List and are set to begin at the next scheduled time.

Check, Change, or Delete Programs

The scheduled recording list can be viewed even when
the unit is in "recording standby" mode.
– See "Tips" (➔ right) for explanation of icons
displayed.
e , r to select the program.
to modify the program.
3a
e , r , w , q to make changes,
then
3b
or
, then
– You cannot delete programs that are currently
recording.
20
RQT9048
to delete.
– " z " lights on the unit's display.
Notes
If the program schedule is changed by the TV station, then this unit
will not be able to detect the change.
Tips
• You can enter up to 16 programs a month in advance.
Schedule List Remaining Recording Time
No Channel Date On
New Scheduled Recording
A
Schedule List screen icons
A
: Currently recording
*
: Programs are overlapped. Recording of the program with
the later start time starts when the earlier program finishes
recording.
Q
: You stopped a weekly or daily scheduled recording. The icon
disappears when the next scheduled recording starts.
: The disc was full. (not enough space)
: The TV program may not be recorded due to copy-protect.
: Recording stopped (Dirty disc, etc.)
X
Check
B
OK: Recordable
➔
(Date): The last day of daily or weekly recording.
!: It may not be possible to record because:
– the disc is write-protected.
– there is no more space left.
– the number of possible recordings has reached its
maximum.
Overlap: When the date and time overlap with another scheduled
recording, only a part of the program can be recorded.
To release the unit from recording
standby
(Before recording starts)
– The unit turns on and "z" on the unit's
display goes out.
Be sure to press [^ DVD POWER] to return the unit to standby mode
before the scheduled recording time. Scheduled recording will work
only if "z" is displayed.
DVD 1:58 SP
3/26 Tue 12:53 PM
Off Mode Check
B