Bulb Exposures; Lcd Panel Illumination - Canon EOS-1D Mark II Digial Instruction Manual

Bulb Exposures

When bulb is set, the shutter stays open while you hold down the
shutter button fully. This method is called manual exposure. Use bulb
exposures for night scenes, fireworks, etc., and other subjects requiring
long exposures.
w
¡
Bulb exposures may result in grainy images due to picture noise. Under
the menu's <
¡
For bulb exposures, using Remote Switch RS-80N3 or Timer Remote
Controller TC-80N3 (both sold separately) is recommended.
U

LCD Panel Illumination

U
The < > button on the upper right of the camera toggles the LCD
panel illumination on and off. To end the bulb exposure, release the
shutter button completely.
96
1
2
3
q e
z
> tab, set [Noise reduction] to reduce the noise.
Display "
buLb
¡Hold down the <
6
turn the <
Then let go of the button.
6
Turn the <
aperture.
Take the picture.
¡Press the shutter button completely.
The elapsed exposure time will be
s
displayed on the LCD panel.
q: sec. , w: min. , e: hour
" on the LCD panel.
W
> button and
> dial to select "buLb".
> dial to set the