Wireless Connections (Optional); Connecting The Speakers With The Optional; Wireless System (Sh-Fx70: 2 Units) - Panasonic SC-BT300 Operating Instructions Manual

Wireless connections (optional)

Connecting the speakers with the optional wireless system (SH-FX70: 2 units)
∫ Wireless setup diagram
7.1ch
e.g.,
Main unit
(with the digital
transmitter)
Seating position
Wireless system
LS
LB
Surround speaker cables
LS: Surround (left), RS: Surround (right)
≥Place on the side of the seating position, about 1 m (3 ft) higher than
ear level.
LB: Surround back (left), RB: Surround back (right)
≥Place behind the seating position, about 1 m (3 ft) higher than ear level.
≥Turn off all equipment before connection and read the
appropriate operating instructions.
≥Connect the AC power supply cord after all other
NOTE connections are complete.
≥Do not use the wireless system and digital transmitter in a
metal cabinet or bookshelf.
≥Place the wireless system within approximately 15 m
(47 ft) from the home theater unit.
Connections
∫ Digital transmitter
Do not insert or remove while the main unit is on.
SH-TR70 digital transmitter
Insert fully until you hear a click.
Digital transmitter cover
PUSH PUSH
DIGITAL
DIGITAL
TRANSMITTER
PUSH PUSH
TRANSMITTER
LOOP EXT
AM ANT
LOOP ANT GND
Main unit
You can use the blunt end of a writing instrument to
push here until the cover pops out.
Remove the digital transmitter cover before installing any
optional digital transmitter.
≥Replace the cover when the digital transmitter is not in use.
∫ Wireless system
Preparation
If the surround/surround back speaker cables (with a blue connector,
with a gray connector, with a brown connector and a tan connector)
have already been connected, disconnect them from the main unit and
the speakers and connect the cables supplied with the wireless
system to the speakers.
Connecting the cables
Connect to terminals of the same color.
≥It is also possible to use the original cables supplied with the main
unit.
– Connect the underlined color cables when using the main unit's cables.
Left side speakers
SURROUND (LS): Blue (Blue)
SURROUND BACK (LB): Gray (Brown)
Right side speakers
SURROUND (RS): Gray (Gray)
SURROUND BACK (RB): Blue (Tan)
Connecting the speakers to the wireless system
SPEAKERS
ENCEINTES
LS / RB LB / RS
AC IN
SURR I/D SET
L R SURROUND (3 – 6 )
AMBIOPHONIQUES
SIDE SIDE
Wireless system
RS
RB
DIGITAL
DIGITAL
TRANSMITTER
TRANSMITTER
LOOP EXT
AM ANT
LOOP ANT GND
Main unit
Insert fully.
Speaker cable
Setting the Surround selector
Selector setting for the left speakers
SPEAKERS
ENCEINTES
LS / RB LB / RS
AC IN
SURR I/D SET
SURROUND (3 – 6 )
L R L
SIDE SIDE AMBIOPHONIQUES
SIDE
Selector setting for the right speakers
SURR
R
SIDE
L
R
SIDE
SIDE
∫ AC power supply cord
Refer to the operating instructions of SH-FX70 for details
Making the wireless link
1
Turn on the wireless system.
Wireless unit on/off button [POWER C I, B Í]
Use this button to turn the unit on and off.
C I: The unit is on.
POWER WIRELESS LINK
WIRELESS LINK indicator
Red: The unit is on and the wireless link is deactivated.
Green: The unit is on and the wireless link is activated.
2 Turn on the main unit.
The wireless link indicator on the main unit will be turned on.
e.g.
≥If the indicator is flashing, refer to the
SLP STCT DDTS PL
SRDE. PRG "Optional wireless system (SH-FX70)" in
PGM RDS
RND
the Troubleshooting guide. (
W1
EQ
W2 WS
3
Turn on the additional wireless system.
4
While pressing [5/9] on the main unit, press the
numbered button [3] on the remote control until "P" lights in
the main unit's display.
5
While "P" is displayed, press
[I/D SET] on the rear of the
additional wireless system.
≥The indicator on the additional
system turns green.
≥If "P" goes off before you press
[I/D SET], repeat step 4 and
then continue the procedure.
6
While pressing [5/9] on the main unit, press the
numbered button [3] on the remote control.
7
Turn off and on the additional wireless system.
≥Make sure the indicator on the additional wireless system lights
up green.
8
Start play on the main unit.
≥For optimal audio output, it is recommended to re-configure
the main unit using SMART SETUP / EASY SETUP.
( 15)
≥If you should change the digital transmitter, repeat the
NOTE
pairing steps for both units of the wireless system, one unit
at a time.
≥You cannot use the wireless system with SH-FX65T or
SH-FX67T digital transmitter.
AC power supply cord
(included with SH-FX70)
To household AC outlet
B Í: The unit is off.
49)

Use a pointed object.
RQT9508
45