Panasonic PT-60LCX63 Operating Instructions Manual page 31

5
CH
VOL VOL
OK
CH
Notes:
• If Cable Only, Antenna Only or Antenna/Cable is selected and DCM (Digital Cable Module) is not in, the Auto Scan will
perform Scan All.
• If Cable Only is selected and DCM is in, Auto scan will be skipped.
• If Cable/Antenna is selected and DCM is in, Antenna (B) Analog & Digital Auto scan will be performed.
Auto Scan - To automatically Scan All available channels, Antenna (A) Analog, Antenna (A) Analog & Digital,
Antenna (B) Analog and Antenna (B) Analog & Digital.
1
Select Auto Scan and press OK to enter
the sub menu.
2
CH
VOL VOL
OK
CH
3
CH
VOL VOL
OK
CH
EXIT
4
Notes:
• Some channels with very weak signals may be locked into memory. If desired, these channels can be deleted man u al ly using
the Manual Program feature.
• Auto scan must be done when you select the input signal for the fi rst time or whenever you change the antenna confi guration.
Press to start
Auto Scan.
Press to select
P r o g r a m
I n p u t
Auto Scan item.
A u t o
M a n u a l
S i g n a l
Press to start
Auto Scan.
Press to exit menu.
C h a n n e l
Scan All
S e t u p
Antenna (A) Analog
S c a n
Antenna (A) Analog & Digital
P r o g r a m
Antenna (B) Analog
Antenna (B) Analog & Digital
M e t e r
Tuning channels
S E L E C T O K
M E N U
E X I T
t o r e t u r n
31