Adjusting To Desired Audio (Audio Menu); Treble; Bass; Balance - Fujitsu Plasmavision P37FT05AUB User Manual

ADJUSTING TO DESIRED AUDIO (AUDIO MENU)

• You can make changes to all audio adjustment options in the
AUDIO Menu. See Page E-25 for the basic procedures.
• The changes you make will be stored for the selected input
mode. Therefore, you need to select a desired input mode
before making any changes.
AUDIO Menu screen

Treble

Press or to make adjustments.
: Stronger treble
: Weaker treble
Press to store.

Bass

Press or to make adjustments.
: Stronger bass
: Weaker bass
Press to store.

Balance

Press or to make adjustments.
: Shifts the volume balance towards the right.
: Shifts the volume balance towards the left.
Press to store.
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• An audio signal from an audio output terminal (AUDIO OUTPUT DIGITAL or AUDIO OUTPUT ANALOG) does not change.
• AUDIO menu will not be displayed when "No Audio" is selected. (See P. E-38)

Loudness

Corrects the balance between bass and treble for easy listening
even with weak volume.
Each time you press or , one of the available choices
appears in the following sequence:
Off Min. Mid.
Press to store.

Sound Mode

Sets the sound field.
Each time or is pressed, the setting is switched.
Flat Standard Voice
[Flat]: Reproduces the sound input signal naturally.
Mild sound reproduction is realized.
[Standard]: Listening-fatigue-free, placid sound
reproduction is realized by suitable
equalizing (sound quality adjustment).
[Voice]: Increases the sound clarity. Announcements,
dialogue, etc. become easy to hear.
[Surround]: Sound image is spread left, right, up, and
down. Sound with the realistic sensation of a
movie, etc. is enjoyed.
Press to store.
Max.
Surround
E-31