Table of Contents
Advertisement
Macintosh
PowerShot S70
OS
Mac OS X (v10.1.5 ~ v10.3)
Computer
The above OS should be preinstalled on computers
Model
with built-in USB ports.
CPU
PowerPC G3/G4/G5
RAM
256 MB or more
Interface
USB
Canon Utilities
Free Hard
ImageBrowser:
200 MB or more
Disk Space
PhotoStitch:
Display
1,024 x 768 pixels/32,000 colors or better is required
PowerShot S60
OS
Mac OS 9.0 - 9.2, Mac OS X (v10.1/v10.2/v10.3)
Computer
The above OS should be preinstalled on computers
Model
with built-in USB ports.
CPU
PowerPC
Mac OS 9.0 - 9.2: 64 MB or more of application
RAM
memory
Mac OS X (v10.1/v10.2/v10.3): 128 MB or more
Interface
USB
Canon Utilities
Free Hard
ImageBrowser:
120 MB or more
Disk Space
PhotoStitch:
800 x 600 pixels/32,000 colors or better is required
Display
1,024 x 768 pixels or better is recommended
You must install the software and driver bundled on
the supplied Canon Digital Camera Solution Disk
onto your computer before connecting the camera
to a computer.
The camera will not operate correctly if you
connect it to your computer before installing the
driver and software. If this happens, please
refer to the Troubleshooting section of the
Software Starter Guide.
40 MB or more
You do not need to turn off the camera or
computer power when making a USB
connection.
Please refer to your computer's manual for
information regarding the location of the USB
port.
You are recommended to use fully charged
battery pack or AC Adapter Kit ACK700 (sold
separately) to power the camera when
connecting to a computer (p. 14, p. 148).
All procedures performed with a connection to
a USB 2.0 compliant board are not
30 MB or more
guaranteed.
9. Additional Features
119
Advertisement
Table of Contents
