Closing The Wall-Mount Cradle; Inserting The Pen Tablet - Fujitsu Point 1600 User Manual

Keyboard Tray

Closing the Wall-Mount Cradle

You can close the wall-mount cradle at any time. The pen tablet does not have to be
removed to close the wall-mount cradle. It can be left in place to recharge the battery.
To close the wall-mount cradle, push the keyboard tray upward until it locks into the
vertical position. The keyboard tray is held in the closed position with magnetic
latches.

Inserting the Pen Tablet

To insert the pen tablet into the wall-mount cradle,
1. Suspend or shut down and turn off the pen tablet.
Note that driver software for the peripheral device you intend to use with the
pen tablet system may need to be initialized upon starting the system. If this is
the case, you may need to shut down the system rather than suspend system
operation. Contact your local help desk or reseller for details on using specific
peripheral devices with your system.
2-24 Using Point 510/Point 1600 Connectivity Peripherals
Figure 2-10. Opening the Wall-Mount Cradle
2
2