Panasonic CF-AX3 Series Operating Instructions Manual page 41

„ Entering Password
Even after entering the
password, password in-
put screen is displayed
again.
Cannot log on to Win-
dows.
("The user name or
password is incorrect" is
displayed.)
Supervisor password
or user password is not
requested when resum-
ing from sleep.
„ Shutting down
Windows does not shut
down.
„ Display
When the screen be-
comes black for a mo-
ment.
No display.
l The computer may be in ten-key mode.
If the NumLk indicator
key mode, and then input.
l The computer may be in Caps Lock mode.
If the Caps Lock indicator
the Caps Lock mode, and then input.
l The user name (account name) includes an "@" mark.
If another user account exists:
Log on to Windows using another user account, and delete the ac-
count that includes "@". Then create a new account.
If no other account exists:
You need to reinstall Windows (è page 32).
l Disable automatic update of Intel
For details, refer to "Help". Click
®
the Intel Smart Connect Technology icon, place the cursor on "?",
and select "Help" in the menu that appears.
l Remove all peripheral devices.
l Wait one or two minutes. It is not a malfunction.
l When you set [Display power saving function] of Power Plan Ex-
tension Utility to [Enabled], if you do the following operations, the
screen becomes black for a moment, but this is not a malfunction.
You can use it.
 Adjust the brightness of the screen with Fn + F1 / Fn + F2 .
 Remove and insert the AC adaptor.
While you are using motion video playback software, benchmark
software for graphic, if error screen is displayed or application soft-
ware does not function normally, set [Display power saving func-
tion] to [Disabled].
l The external display is selected. Press Fn + F3 (
switch the display.
Wait until the display has been switched completely before press-
ing Fn + F3 ( or + P ) again.
l The display is turned off by the power-saving function. To resume,
do not press the direct selection keys, but press any other key like
Ctrl .
l The computer entered sleep or hibernation by the power-saving
function. To resume, slide the power switch.
l The screen may become darker. Press Fn + F2 to make the
screen brighter.
lights, press NumLk to disable the ten-
lights, press Caps Lock to disable
®
Smart Connect Technology.
on the notification area, click
or + P ) to
41