Table of Contents
Advertisement
Settings in BIOS Setup
In BIOS Setup you can set the system functions and the hardware configuration of the notebook. The
settings can only be changed via the keyboard.
When it is delivered, the notebook is set to factory default settings. You can change these settings in
BIOS Setup. Any changes you make take effect as soon as you save and quit the BIOS Setup.
The BIOS Setup programme contains the following menus:
Main:
for system settings as time, date, hard disk and monitor selection
Advanced:
for system settings such as ports and keyboard
for password settings and safety functions
Security:
Boot:
for configuring the boot sequence
Info:
for displaying the system configuration (e.g. processor and memory configuration)
Exit:
to exit the BIOS Setup
Start BIOS Setup
►
Restart the notebook (switching ON/OFF or warm boot).
The following display briefly appears on the screen during start-up:
<ESC> Diagnostic screen
►
When this message appears, press the function key F2 .
If a password has been assigned:
i
►
Enter the password and press the Enter key.
If you have forgotten the password, contact your system administrator or contact our
hotline/help desk.
A26391-K168-Z120-1-7619, edition 2
<F12> Boot Menu
<F2> BIOS Setup
61
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the AMILO Pro V8010 and is the answer not in the manual?
Questions and answers