Power Ov; Power Off - Fujitsu 420D User Manual

Using the Fujitsu Icon
The Fu j i t su Icon has produ ct regi s tra ti on form s
and instru cti on s , ch a n ge of ad d ress inform a ti on
and form s , con t act inform a ti on including tel e-
ph one nu m bers and e-mail ad d resses and an
acce s s ory catalog with the inform a ti on for order-
ing acce s s ories for your noteboo k . Do u ble cl i ck
on the Icon and then on the sel ecti on you wi s h .

Power Off

Before turning o the power by putting the
Power Switch in the O position, check that the
Hard Disk, CD-ROM,PCMCIA card and the
Floppy Disk Access Indicators are all O . (See
Figure 2-3, page 17.) If you turn o the power
while accessing a disk or PCMCIA card the re
is a risk of loss of data. The O position is
reached by facing the Keyboard and Built-in
Display and moving the switch toward the front
of your notebook. To assure that your notebook
shuts down without error, use the shutdown
sequence for the operating system.
U s i n g Y o u r L i f e B o o k 4 0 0 S e r i e s
C A U T I O N
Never turn your notebook off while an
application is running. Be sure to close all
files, exit all applications and shutdown
the operating system prior to turning off
the power with the Power Switch. If files
are open when you turn the power off,
you will lose any changes that have not
been saved, and may cause disk errors.
Shutting down your notebook from the operat-
ing system lets it close down operations and
turn o the power in the proper sequence to
prevent errors. The sequences are:
Windows 95
1.Go to the Start Button Menu.
2. Click on Shutdown.
3. Verify that Shutdown is selected and click on
YES.
L i f e B o o k 4 0 0 S e r i e s f r o m F u j i t s u
P O I N T
If you do not turn the Power Switch to
Off after shutting down you must use
the use the Suspend/Resume Button to
turn on your notebook as the Power
Switch will already be in the On position.
Windows 3.1
1. Save all data and exit all applications.
2. Exit Windows.
3. When the MS-DOS prompt appears put the
Power Switch in the O position.
MS-DOS
1. Save all data and exit all applications.
2. When the MS-DOS prompt appears put the
Power Switch in the O position.
If you are going to store your notebook for a
month or more,take the following precautions:
23