Related Manuals for FujiFilm DPC-R1
Summary of Contents for FujiFilm DPC-R1
- Page 1 IMAGE MEMORY CARD READER DPC-R1 User's Guide for Windows / Macintosh This manual will show you how to use your IMAGE MEMORY CARD READER DPC-R1 correctly. Please follow the instructions carefully.
-
Page 2: Important
Card Reader DPC-R1. (3) Fuji Photo Film Co., Ltd. shall not be liable for any losses incurred by the customer or other parties by use of the DPC-R1 according to the accessory software and owner’s manual. (4) The DPC-R1 has been carefully inspected, however, if the product is found to be defective due to faulty materials or workmanship the product will be replaced. -
Page 3: Notes On Using Your Dpc-R1 Correctly
The xD-Picture Card, SmartMedia Card and internal data will be destroyed. Do not drop or otherwise apply strong shock or vibration to the DPC-R1. Strong shock or vibration will damage the DPC-R1 or cause trouble. Do not store, or use, the DPC-R1 with heavy objects atop it. -
Page 4: Table Of Contents
IMPORTANT ...2 NOTES ON USING YOUR DPC-R1 CORRECTLY ...3 BEFORE USING ...5 Data storage ...5 HANDLING ...6 USB cable connection ...6 Inserting the xD-Picture Card or SmartMedia ...10 Removing the xD-Picture Card and SmartMedia Card ...11 Disconnecting the USB cable ...12 Windows Using with Windows ...14... -
Page 5: Before Using
DPC-R1 improperly. 2. When the USB cable or xD-Picture Card or SmartMedia Card were removed and when the device power was turned off while the DPC-R1 was being accessed (data communication). We recommend that you copy your valuable data to another media (MO disk, CD-R,... -
Page 6: Handling
• The DPC-R1 can be connected and disconnected even while the personal computer power is on. • When there are two or more USB connectors, the DPC-R1 can be connected to any port. • If connected through a USB hub, depending on the type of hub, the DPC-R1 may malfunction. - Page 7 Windows XP (1) When you first connect the DPC-R1 to your computer, the "Found New Hardware Wizard" window appears. Click the [Next] button. (2) The search window shown below appears.
- Page 8 (3) A warning message such as the one shown below may appear. If so, click the [Continue Anyway] button. Tests are being performed to ensure that there are no problems with DPC-R1 Driver operation. NOTE Note that clicking the [STOP installation] button requires you to redo the installation from the beginning.
- Page 9 (5) When the "Installation completed" window appears, click the [Finish] button.
-
Page 10: Inserting The Xd-Picture Card Or Smartmedia
Inserting the xD-Picture Card or SmartMedia When inserting a xD-Picture Card or SmartMedia, insert them into the xD-Picture Card slot or SmartMedia slot respectively, as indicated in the figures below. xD-Picture Card slot READY / ACSESS lamp (green) Insert the xD-Picture Card with the contact area (gold colored area) facing downwards. NOTE Push the xD-Picture Card slowly but firmly all the way into the slot with your fingertip. -
Page 11: Removing The Xd-Picture Card And Smartmedia Card
Removing the xD-Picture Card and SmartMedia Card Windows 98, Windows Me, Windows 2000 Professional Always remove the xD-Picture Card and SmartMedia Card as described below. If images downloaded from the DPC-R1 are still open, exit the image viewing application. (1) Before removing the xD-Picture Card and SmartMedia Card, open “My Computer”... -
Page 12: Disconnecting The Usb Cable
(1) Double-click the icon (circled) displayed in the taskbar (in the bottom-right corner of the screen). (2) When the next screen appears, check that the READY/ACCESS lamp is no longer lit or flashing and then left-click "Fujifilm USB MemoryCard ReaderWriter" to select it. Then click the [Stop] button. -
Page 13: Windows
(3) Select "Fujifilm USB MemoryCard ReaderWriter" and click the [OK] button. (4) In Windows 2000, the window shown below appears. Click the [OK] button and close the "Disconnect hardware" window. In Windows XP, close the "It is safe to disconnect the hardware"... -
Page 14: Using With Windows
Using with Windows Hardware and software requirements To run this software, you must have the hardware and software described below. Check your system before you begin the installation. Compatible PCs Operating System Hard disk space 1 Models with a USB interface as a standard feature and one of the above operating systems preinstalled. -
Page 15: Setup Procedure In Windows
Setup Procedure in Windows This section describes the setup procedure for using this product on Windows. Be sure to use this procedure for setup. The screens shown on some PCs may differ slightly from those shown here. Do not connect the USB cable to your computer until you have finished installing the software. - Page 16 Launching the Installer Manually 1 Double-click the “My Computer” icon. Windows XP users should click “My Computer” in the “Start” menu. 2 Right-click “DPC-R1” (CD-ROM drive) in the “My Computer” window and select “Open”. 3 Double-click “SETUP” or “SETUP.exe” in the CD-ROM window.
- Page 17 (4) The Setup screen appears. Click the [Install Driver Software for DPC- R1] button. (5) When file copying ends, the "InstallShield wizard finished" window appears. Click [Finish]. (6) When the screen shown below appears, select "Yes, I want to restart my computer now"...
-
Page 18: Using The Dpc-R1
Files can be copied in either direction between a xD-Picture Card and a SmartMedia. NOTE • Never switch off your PC or touch the DPC-R1 slot cover while the READY/ACCESS lamp is lit. Either of these actions could corrupt the data on the xD-Picture Card or SmartMedia or damage the media itself. -
Page 19: Using With A Macintosh
Using with a Macintosh This section describes the setup procedure for using this product on a Macintosh. Note that the setup procedures for Mac OS 8.6 to 9.2 and Mac OS X are different. The setup procedure for Mac OS 8.6 to 9.2 is described below. See OS X. -
Page 20: Set Up Procedure
Set up procedure (1) Switch on your Macintosh and launch the Mac OS. (2) Load the bundled CD-ROM (DPC-R1 setup disk) into the CD-ROM drive. (3) Double-click the "DPC-R1" CD-ROM icon displayed on the desktop. (4) Double-click "Installer for Mac OS 8.6-9.x" to launch the installer. - Page 21 In this case, connect the DPC-R1 directly to the personal computer. • If there are two or more USB ports, the DPC-R1 can be connected to any port. This completes set up. Hereafter, the personal computer automatically recognizes the DPC-R1 by connection of the USB cable.
-
Page 22: Mac Os X
(1) Start up your Macintosh and load the enclosed CD-ROM into the CD- ROM drive. Quit any applications that are currently running. Open the "DPC-R1" CD-ROM icon displayed on the desktop and double-click "Installer for MacOS X". , PowerBook G3... - Page 23 (2) When you double-click "Installer for MacOS X", the window shown below appears. Click the padlock icon beside "Click the lock to make changes". (3) The "Authorization" window shown below appears. Enter the administrator name and password. Then click "OK". Macintosh...
- Page 24 Macintosh (4) The "Introduction" window shown below appears. Click [Continue]. (5) The "Important Information" window shown below appears. Click [Continue].
- Page 25 Macintosh (6) The "Select a Destination" window shown below appears. Select the installation destination disk and click [Continue]. (7) The "Easy Install" window shown below appears. Click [Install].
- Page 26 In this case, connect the DPC-R1 directly to the personal computer. • If there are two or more USB ports, the DPC-R1 can be connected to any port. This completes set up. Hereafter, the personal computer automatically recognizes the DPC-R1 by connection of the USB cable.
-
Page 27: Using The Dpc-R1
Files can be copied in either direction between a xD-Picture Card and a SmartMedia. NOTE • Never shut down your Macintosh or touch the DPC-R1 slot cover while the READY/ACCESS lamp is lit. • Either of these actions could corrupt the data on the xD-Picture Card or SmartMedia or damage the media itself. -
Page 28: File Exchange (Mac Os 8.6 To 9.2 Users)
Macintosh File Exchange (Mac OS 8.6 to 9.2 users) To use a xD-Picture Card or a SmartMedia, the “File Exchange” utility provided with the Mac OS system is required. Check that “File Exchange” is installed in the “Extensions Manager” Control Panel inside the System folder. Check that there is an [ ] in the “File Exchange”... -
Page 29: Trouble Shooting
TROUBLE SHOOTING Before deciding that there is some kind of trouble, check the DPC-R1 again. Error Personal computer does not recognize properly connected to the the DPC-R1. personal computer. Device driver is not installed correctly. The PC cannot read Device driver is not installed the xD-Picture Card correctly. -
Page 30: Main Specifications
3.3 V (4, 8, 16 or 32 MB) 3.3 V with ID (16, 32, 64 or 128 MB) However, 64MB media formatted on the following FUJIFILM cameras cannot be used: FinePix 700, FinePix 500, CLIP-IT 50 or DS-250HD xD-Picture Card 16, 32, 64 or 128MB Universal Serial Bus (USB) Interface ver 1.1... -
Page 31: Uninstalling The Software
(4) Close all files. (5) Open the “My Computer” window and double-click “Add/Remove Programs” in the Control Panel. (6) The “Add/Remove Programs Properties” window appears. Select the software to be uninstalled (Fujifilm USB MemoryCard ReaderWriter) and then click the [Add/Remove] button. - Page 32 (7) When the confirmation message appears, click the [OK] button. Check your selection carefully since the process cannot be cancelled once you click [OK]. (8) The uninstallation in progress window is displayed. When uninstallation ends, the maintenance completion screen shown below appears.
- Page 33 Programs] (Windows 2000) or [Add or Remove Programs] (Windows XP) in the Control Panel. (5) Select the file name of the driver (Fujifilm USB MemoryCard ReaderWriter) to be deleted and then click [Change/Remove]. (6) The "Confirm file removal" message shown below appears.
- Page 34 (7) The uninstallation in progress window is displayed. When uninstallation ends, the maintenance completion screen shown below appears. Click [Finish]. (8) The restart request window shown below appears. Click [Finish] and restart your computer. UNINSTALLING THE SOFTWARE...
-
Page 35: Macintosh
Only perform this operation when you no longer require the installed software. Mac OS 8.6 to 9.2 (1) Check that the DPC-R1 is not connected to your Macintosh. Open the "Extensions" folder in the Mac OS System Folder (on the startup volume) and put the 2 files shown below in the Trash. - Page 36 FGS - 204106...
Need help?
Do you have a question about the DPC-R1 and is the answer not in the manual?
Questions and answers