Page 1
All manuals and user guides at all-guides.com FILE NO. 140-200109 SERVICE MANUAL COLOR TELEVISION/ DVD VIDEO RLAYER MD9DL1...
Page 2
All manuals and user guides at all-guides.com CAUTION THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS SERVICE MANUAL CARE- FULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE.
All manuals and user guides at all-guides.com SERVICING NOTICES ON CHECKING 1. KEEP THE NOTICES 6. AVOID AN X-RAY As for the places which need special attentions, Safety is secured against an X-ray by consider- they are indicated with the labels or seals on the ing about the cathode-ray tube and the high cabinet, chassis and parts.
All manuals and user guides at all-guides.com IMPORTANT SAFEGUARDS READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to.
Page 5
All manuals and user guides at all-guides.com IMPORTANT SAFEGUARDS (CONTINUED) DAMAGE REQUIRING SERVICE Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power-supply cord or plug is damaged. If liquid has been spilled, or objects have fallen into the unit. If the unit has been exposed to rain or water.
All manuals and user guides at all-guides.com GENERAL SPECIFICATIONS CRT Size / Visual Size 9 Inch / 228.6 mmV System CRT Type Normal Deflection 90 degree Magnetic Field BV/BH +0.45G/0.18G Color System NTSC Speaker 2 Speaker Position Side Size 3 Inch Impedance 8 Ohm Sound Output...
Page 7
All manuals and user guides at all-guides.com GENERAL SPECIFICATIONS Interface Switch Front Power (Tact) Channel Up Channel Down Volume Up Volume Down Play Open/Close Skip(>>) Skip(<<) Still/Pause Stop Main Power SW Rear AC/DC Color On/Off (SECAM Only) Degauss Main Power SW Indicator Power Stand-by...
Page 8
All manuals and user guides at all-guides.com GENERAL SPECIFICATIONS G-12 On Screen Menu(TV) Display Menu Type Icon Picture Contrast Brightness Color Tint Sharpness Sound Bass Treble Balance Auto Tuning Manual Tuning CATV Option Language V-Chip Clock Clock Set On/Off Timer Sleep Timer CH/AV/DVD Stereo, Audio Output, Bilingual...
Page 9
All manuals and user guides at all-guides.com GENERAL SPECIFICATIONS G-13 OSD Language (TV) Eng, Fre, Spa (DVD) Eng, Fre, Spa G-14 Remote Unit RC-EF Control Glow in Dark Remocon Format Custom Code 71-8E h Power Source Voltage(D.C) UM size x pcs UM-4 x 2 pcs Total Keys Keys...
Page 10
All manuals and user guides at all-guides.com GENERAL SPECIFICATIONS G-15 Features Auto Degauss Auto Shut Off Auto Power On, Auto Play Canal+ CATV Anti-theft Rental Memory(Last CH) Memory(Last Volume) V-Chip Type Fast Text UniText Top Text Auto Search CH Allocation Channel Lock Just Clock Function Game Position...
Page 11
All manuals and user guides at all-guides.com GENERAL SPECIFICATIONS G-17 Carton Master Carton Content --- Sets Material --- / --- Dimensions W x D x H(mm) Description of Origin Gift Box Material Double/White W/Color Phote Label Dimensions W x D x H(mm) 338x376x386 Design As Per Buyer 's...
All manuals and user guides at all-guides.com DISASSEMBLY INSTRUCTIONS 1. REMOVAL OF MECHANICAL PARTS 1-3: TV/DVD BLOCK (Refer to Fig. 1-3) Remove the 2 screws 1. AND P.C. BOARDS Disconnect the following connectors: 1-1: BACK CABINET (Refer to Fig. 1-1) (CP301, CP302, CP401 and CP403).
Page 13
All manuals and user guides at all-guides.com DISASSEMBLY INSTRUCTIONS 1-5: FRONT TRAY PLATE/TOP SHIELD (Refer to Fig. 1-5) Unlock the 2 supports 1. Remove the Front Tray Plate in the direction of arrow (A). Remove the 14 screws 2. CD Deck Remove the Top Shield in the direction of arrow (B).
All manuals and user guides at all-guides.com DISASSEMBLY INSTRUCTIONS 2. REMOVAL OF ANODE CAP 3. After one side is removed, pull in the opposite direction to remove the other. Read the following NOTED items before starting work. NOTE After turning the power off there might still be a potential Take care not to damage the Rubber Cap.
All manuals and user guides at all-guides.com DISASSEMBLY INSTRUCTIONS 3. REMOVAL OF DEFLECTION YOKE (Refer to Fig. 3-1) Loosen the screw 1. Remove the Convergence • Purity Magnet in the direction of arrow. Remove the 3 Wedges. Remove the Deflection Yoke in the direction of arrow. INSTALLATION Install new Deflection Yoke in reverse steps of REMOVAL.
All manuals and user guides at all-guides.com SERVICE MODE LIST This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily. To enter the Service Mode, press both set key and remote control key. Press both the VOL. key and remocon keys simultaneously for more than 1 second. Press both the STOP key and remocon keys simultaneously for more than 3 seconds.
All manuals and user guides at all-guides.com NOTE FOR THE REPLACING OF MEMORY IC If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to ensure correct data settings while making reference to TABLE 1. No need the setting for the INI 4E~6A because the adjustment values are recorded.
All manuals and user guides at all-guides.com ELECTRICAL ADJUSTMENTS BEFORE MAKING ELECTRICAL FUNCTION FUNCTION ADJUSTMENTS R CUT OFF BRI. AV(CENT.) G CUT OFF BRI. AV(MAX) Read and perform these adjustments when repairing the B CUT OFF BRI. AV(MIN) G DRIVE COL.
Page 19
All manuals and user guides at all-guides.com ELECTRICAL ADJUSTMENTS 2-4: WHITE BALANCE 2-8: VERTICAL POSITION NOTE: Adjust after performing CUT OFF adjustment. NOTE: Adjust after performing adjustments in section 2-7. Place the set with Aging Test for more than 15 minutes. Receive the center cross signal from the Pattern Receive the white 100% signal from the Pattern Generator.
Page 20
All manuals and user guides at all-guides.com ELECTRICAL ADJUSTMENTS 2-12: SEPARATION L/H 2-14: SUB TINT CENTER Receive the stereo signal (L=2KHz, R=400Hz). Receive the color bar pattern. (RF Input) Connect the AC voltmeter to AUDIO OUT JACK though Using the remote control, set the brightness, contrast, stereo filter (L=400Hz, R=2KHz).
Page 21
All manuals and user guides at all-guides.com ELECTRICAL ADJUSTMENTS 2-15: SUB COLOR CENTER 2-16: SUB CONTRAST MAX Receive the color bar pattern. (RF Input) Activate the adjustment mode display of Fig. 1-1 and Using the remote control, set the brightness, contrast, press the channel button (15) on the remote control to color and tint to normal position.
All manuals and user guides at all-guides.com ELECTRICAL ADJUSTMENTS PURITY AND CONVERGENCE 3-3: STATIC CONVERGENCE ADJUSTMENTS NOTE Adjust after performing adjustments in section 3-2. NOTE Receive the crosshatch pattern from the color bar Turn the unit on and let it warm up for at least 30 generator.
All manuals and user guides at all-guides.com DVD BLOCK DIAGRAM AUDIO SW TO TV BLOCK IC8504 SN74LV4052APW Q7013, Q7005 SPDIF(CD) J7002 DVD REQ COAXIAL LINE DRIVER DIGITAL OUT SPDIF(DVD) DVD ERR,DVD SOS,DVD VALID,DVD STB DVD: "L" DVD ROM DRIVE DVD/CD CD : "H"...
All manuals and user guides at all-guides.com TV BLOCK DIAGRAM TU001 SCL SDA AGC IF SAW FILTER CF601 Q205 PRE AMP Q605 BUFFER Q606 BUFFER Q607 FROM DVD BLOCK BUFFER CHROMA/IF IC601 TB1253N MEMORY IC199 RESET S-24C04BDP-LA AT+5V IC102 R.OUT PST600C AT+5V G.OUT...
All manuals and user guides at all-guides.com POWER BLOCK DIAGRAM SOUND+B AT+8V +5V REG. IC154 KIA7805API Q153 P.CON 5V P.CON+D5V DRIVER Q150 AT+5.6V +5.6V REG. Q151 P.CON 5V F501 D501 P.CON+A5V TRANSFORMER DRIVER SWITCHING RECTIFIER AC IN Q152 T501 TV POWER H Q504, Q508 SW REG.
All manuals and user guides at all-guides.com IN /OUT SCHEMATIC DIAGRAM (AV PCB) FROM/TO AV SW MUTE SW DVD_A_L Q7005 DTA114EKA MUTE SW DVD_A_R Q7007 2SC2412K SWD_V.OUT R7025 MUTE SW MONITOR_A_L MUTE SW Q7008 Q7004 2.2K 2SC2412K MONITOR_A_R 2SC2412K R7014 R7020 R7026 2.2K...
Page 41
All manuals and user guides at all-guides.com AV SW SCHEMATIC DIAGRAM (AV PCB) R8008 1/2W FRONT AUDIO(R) J8001 HTJ-032-05AR C8007 R8015 BUFFER Q8002 2SC2412K J8002 HTJ-032-05AW FRONT AUDIO(L) C8008 R8016 BUFFER Q8003 2SC2412K J8003 HTJ-032-05AY FROM/TO I/O FRONT VIDEO MONITOR_A_L MONITOR_A_R DVD_A_L L701...
Page 42
All manuals and user guides at all-guides.com STEREO SCHEMATIC DIAGRAM (AV PCB) FROM/TO MICON/TUNER R912 100 1/4W R911 100 1/4W FROM/TO AV SW TUNER_A_R TUNER_A_L TP901 JWF-50K-1 W870 W871 FROM/TO VIF/SIF/CHROMA TU_AUDIO NC 0 OUT SW IIC Decoder St.PLL Pilot Input Switch L-R Filter...
All manuals and user guides at all-guides.com DC JACK J503 TV POWER SCHEMATIC DIAGRAM HEC0824-010010 CAUTION: DIGITAL TRANSISTOR RY503 (MAIN PCB) ALKS325 D550 MTZJ6.2B D502 1SS133 DC POWER SW NOTE: THE RESISTOR MARKED F IS FUSE RESISTOR. Q501 D526 2SC1815Y THE ALUMI ELECTROLYTIC CAPACITOR MARKED NP 10.9 1SS133...
All manuals and user guides at all-guides.com INTERCONNECTION DIAGRAM COMMAND TRANSMITTER TM101 HEADPHONE J301 TO OS101 CP101 J8001 J8002 J8003 I2C SCL AUDIO IN VIDEO IN TO SHILED TOP GND I2C SDA CP302 CP301 I2C OFF CP4001 CD4001 SDT7 BLADE WIDE CD503 SDT6...
Page 47
All manuals and user guides at all-guides.com WAVEFORMS MPEG TV POWER SDRAM SYSCON DEFLECTION VIDEO ENCODER NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.
Page 48
All manuals and user guides at all-guides.com WAVEFORMS MICON/TUNER VIF/SIF/CHROMA NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.
All manuals and user guides at all-guides.com WAVEFORMS IN/OUT STEREO SOUND AMP AV SW NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.
All manuals and user guides at all-guides.com ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description RESISTORS R130 BZ210182 R002T4103J 10K OHM 1/4W ! R165 BZ210183 R3X18A220J R,METAL OXIDE OHM 2W ! R166 BZ210184 R3X281101J R,METAL OXIDE 100 OHM 1W ! R404 BZ210112 R4X5T6152F...
Page 54
All manuals and user guides at all-guides.com ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description DIODES D403 BZ410023 D97U09R11B DIODE,ZENER MTZJ9.1B T-77 ! D408 BZ410018 D94TA27011 DIODE,ZENER HZ27-1L TD ! D409 BZ410017 D94TA11B13 DIODE,ZENER HZ11B3L TD ! D411 BZ410014 D2LTPG06J0 DIODE,SILICON...
Page 55
All manuals and user guides at all-guides.com ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description IC199 BZ610213 A577A2I255 S-24C08ADPA-01 ! IC302 BZ611035 I0FSP75220 AN7522 ! IC401 BZ611025 I03TD80400 LA78040 ! IC501 BZ611041 I2BT066230 STR-G6623 ! IC503 BZ611015 I1KA97805A KIA7805API ! IC504...
Page 56
All manuals and user guides at all-guides.com ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description TRANSISTORS Q7003 BZ510002 T8YJ2412K0 TRANSISTOR,SILICON 2SC2412KT146 R,S Q7004 BZ510002 T8YJ2412K0 TRANSISTOR,SILICON 2SC2412KT146 R,S Q7005 BZ510025 TPYJB05001 COMPOUND TRANSISTOR DTA114EKAT146 Q7006 BZ510045 TNYJD05001 COMPOUND TRANSISTOR DTC144EKAT146 Q7007...
Page 57
All manuals and user guides at all-guides.com ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description MISCELLANEOUS B501 BZ310130 024HT03564 CORE,BEADS W4BRH3.5X6X1 B502 BZ310122 024HT03563 CORE,BEADS W4BRH3.5X6X1.0X2 B503 BZ310130 024HT03564 CORE,BEADS W4BRH3.5X6X1 B504 BZ310122 024HT03563 CORE,BEADS W4BRH3.5X6X1.0X2 B505 BZ310121 024HT03553 CORE,BEADS...
Page 58
All manuals and user guides at all-guides.com ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description MISCELLANEOUS X1001 BZ613020 100CT01210 CRYSTAL HC-49/U X4001 BZ613021 100DA02706 CRYSTAL AT-49 RESISTOR RC....CARBON RESISTOR CAPACITORS CC....CERAMIC CAPACITOR CE....ALUMI ELECTROLYTIC CAPACITOR CP....
Page 59
All manuals and user guides at all-guides.com TOSHIBA VIDEO PRODUCTS PTE. LTD. 438B ALEXANDRA ROAD, BLOCK B #06-01 ALEXANDRA TECHNOPARK SINGAPORE 119968...
Need help?
Do you have a question about the MD9DL1 and is the answer not in the manual?
Questions and answers