Download Print this page

Advertisement

Quick Links

TROUBLESHOOTING
If the flashlight flickers, works intermittently, changes modes automatically, appears
dim or faded, or does not turn on, check and verify that:
• Each battery is fully inserted matching the polarity (+/-) on the battery holder.
• Each battery end is touching a metal contact in the battery holder.
• The battery holder contacts are clean and the springs are not bent sideways.
• The flashlight's inner spring is firmly attached and not bent.
• The battery holder is inserted into the flashlight with the positive (+) end first.
• The tail cap is twisted on tightly.
Firmly press the power button on and o several times:
• If the flashlight still does not turn on, replace the batteries.
• If the problem persists, contact GearLight for a replacement.
MAINTENANCE
Inspect the flashlight monthly and carefully remove any damaged batteries and clean
any corrosion. If the flashlight is used less than once a month, remove the batteries
between uses. Lubricate all threads and rubber O-rings with petroleum jelly
twice yearly.
WARRANTY AND LIMITATION OF LIABILITY
Limited One-Year Warranty
GearLight warrants this product for one year from the date of purchase
against any defects in material or workmanship. This warranty does not cover
normal wear and tear, nor damage resulting from misuse or neglect. We will,
at our discretion, repair, replace, or refund the purchase price of this product
should we determine it to be defective.
Limitation Of Liability
Liability limited to the purchase price of this product. GearLight shall not be
liable for any incidental or consequential damages or any implied warranty on
this product.
Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion
may not apply to you.
Irvine, California | USA | www.GearLight.com
S2000 LED FLASHLIGHT
FOR YOUR SAFETY, READ BEFORE OPERATING
Package Contents:
1x GearLight S2000 LED Flashlight
1x AA Battery Holder (Inside Flashlight)
1x Lanyard
1x Operation Guide
1x Warranty Card
v3
User Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the S2000 and is the answer not in the manual?

Questions and answers

Bonnie Simrell
March 16, 2025

I have two of these flashlights and love them. One went dead and was revived by replacing the batteries. Later the second one died. I have replaced the batteries correctly. The flashlight still does not turn on. Could it be the bulb? If so how do I replace that? I don't see a way to remove it.

1 comments:
Mr. Anderson
March 16, 2025

The GearLight S2000 flashlight user manual does not mention replacing the bulb. If the flashlight does not turn on after replacing the batteries, follow these troubleshooting steps:

1. Ensure each battery is fully inserted, matching the polarity (+/-) on the battery holder.
2. Check that each battery end touches a metal contact in the battery holder.
3. Verify that the battery holder contacts are clean and that the springs are not bent.
4. Ensure the flashlight’s inner spring is firmly attached and not bent.
5. Insert the battery holder into the flashlight with the positive (+) end first.
6. Tighten the tail cap securely.
7. Press the power button firmly several times.

If the flashlight still does not turn on, replace the batteries. If the problem persists, contact GearLight for a replacement. The manual does not provide instructions for replacing the bulb.

This answer is automatically generated

Summary of Contents for GearLight S2000

  • Page 1 1x Lanyard Limitation Of Liability 1x Operation Guide Liability limited to the purchase price of this product. GearLight shall not be liable for any incidental or consequential damages or any implied warranty on 1x Warranty Card this product.
  • Page 2 WARNING: To avoid eye injury, do not stare directly into the light beam or shine the CAUTION: The flashlight may become warm or hot after extended periods of use beam directly into anyone’s eyes. This product is not designed, intended, or at the highest setting.