Connection In Ad Hoc Mode - Hitachi CP-TW2503 User Manual
Hide thumbs
Also See for CP-TW2503:
- User manual (148 pages) ,
- Quick start manual (4 pages) ,
- User manual (24 pages)
Table of Contents
Advertisement
2.4.1 Connection in Ad Hoc Mode
Set the following when connecting the projector and the computer in Ad Hoc mode.
Projector setting
the power of the projector and pull out the power cord's plug from the outlet. Do
projector.
2) Turn on the projector.
3) Press the MENU button on the remote control or the
control panel of the projector.
MODE: ADHOC
DHCP
IP ADDRESS
SSID
ENCRYPTION
CH
As for setting an IP address, refer to "About IP address". (13)
Computer setting
2) Select SSID set for the projector by following the procedure of wireless
connection of the computer. Enter encryption key by following the computer's
instruction if it is encrypted.
NOTE
USB TYPE A
ENTER
2. Connection to the network
port of the projector.
15
Advertisement
Table of Contents
