System Clean Cycle; To Refresh/Clean Inside Of Washer - Frigidaire Affinity FAFW3801L Use & Care Manual

OPERATING INSTRUCTIONS

System Clean Cycle

TO REFRESH OR CLEAN INSIDE OF WASHER
To clean and freshen the washer, perform the System
Clean cycle. For best results use the System Clean
cycle once a month. To begin the cycle, press and hold
the Spin Speed and Options buttons simultaneously for
10 seconds until the display changes to "CLn" .
IMPORTANT
Items left in washer while performing the System
Clean cycle will cause a severe out-of-balance situation
that could damage the washing machine.
REMOVE ALL ITEMS FROM WASH DRUM before fi lling
the detergent chamber with one (1) cup of liquid chlorine
bleach OR one (1) pouch of TIDE
CLEANER. DO NOT use both. Press Start to begin.
For best results
Immediately follow up with a Spin Only
Cycle, select Extra Rinse on Max Spin
Speed with no detergent or bleach to
help clear any residual bleach left after
the System Clean Cycle.
NOTE
If the System Clean cycle is cancelled or paused
during the cycle, the washer will go through 2 rinse
cycles to clean the drum of any residual bleach before
unlocking the door.
14
WASHING MACHINE
®
sanitize max
hot high
warm medium
cold low
cold water no spin
clean
auto spin options
temp speed
Press and hold both for ten seconds
to enter System Clean cycle.
WARNING
HARMFUL VAPOR HAZARD
Do not use or mix liquid chlorine bleach with other
household chemicals such as toilet cleaners, rust
removers, acid or products containing ammonia. These
mixtures can produce dangerous fumes which can
cause serious injury or death.
delay
start
chime
stain clean
heavy door lock
sensing
energy saver
normal
wash
freshwater light
touch pause
rinse to add a garment
select cancel
soil START
level pause