Select Vibration Mode; Calls - Nokia HS-67WL User Manual

HS-67WL_UG_en_Draft10_with_FCC&IC_notice.fm Page 13 Tuesday, December 23, 2008 10:26 AM

■ Select vibration mode

You can set the loopset to vibrate in different situations.
To select the desired vibration mode during a call (when there is no other
call waiting or on hold), press and hold the multifunction key for about 2
seconds one or more times:
• To set the loopset to vibrate when you press a key or make or receive a
call (default setting), press and hold the multifunction key once. The
loopset beeps once.
• To set the loopset to vibrate when you press a key, press and hold the
multifunction key twice. The loopset beeps twice.
• To set the loopset to vibrate when you make or receive a call, press and
hold the multifunction key three times. The loopset beeps three times.
• To turn the vibration off, press and hold the multifunction key four
times. The loopset beeps four times.

■ Calls

To make a call, use your mobile phone in the normal way when the loopset
is connected to it. During the call, the loopset vibrates, and the indicator
light quickly flashes blue.
To redial the number you last called (if your phone supports this feature
with the loopset), when no call is in progress, press the multifunction key
twice.
To activate voice dialling (if your phone supports this feature with the
loopset), when no call is in progress, press and hold the multifunction key
B a s i c u s e
13