XINDAO XD COLLECTION P324.73 Series Manual page 4

TO CHARGE THE POWERBANK
By cable:
• Plug in the supplied micro USB cable to your wall charger or computer USB
port. The USB connector goes to your charger, the micro USB goes to your
powerbank.
• The blue indicator lights will start blinking when charging. When all lights are
full the item is fully charged.
• When fully charged disconnect the powerbank and it's ready to use.
Imporant: Only use included accessories or certified and tested accessories
to charge the powerbank. Using third party accessories can influence the
item safety.
TO CHARGE YOUR MOBILE DEVICE USING THE POWERBANK
By cable:
• Plug your cable into the USB port on the power bank, the other end goes
into your device.
• Your device will show a charging condition in the usual way, blue light will
show on the power bank.
• The power bank will take approximately two hours to charge your mobile
device to 95%.
• After you have charged your device, recharge the power bank before
using again.
Wireless:
• Make sure your phone is compatible for wireless charging.
• Switch on the powerbank using the on button
• Put your wireless charging enabled device on the wireless charging surface
of the powerbank. This output is marked 'out'