Page 1
Mount side support bracket with the hardware supplied (included with the installation kit) Left& right support brackets installed Mount unit support to the side brackets using the supplied hexagonal bolds (included with the installation kit) Installation manual CA-HM-UNI-EVO.004 | Version 2.0...
Page 2
Mount screen support to the screen using Mount screen cover onto the screen support the two center screws on each side using the remaining four screws as indicated (included with SPH-EVO82DAB) (included with SPH-EVO82DAB) Installation manual CA-HM-UNI-EVO.004 | Version 2.0...
Page 3
Pull screen cable over the unit into the opening Slide the screen neck into the unit cover, and install the unit cover pay attention to the positioning of the tabs Completely inserted screen neck Slide the screen support into the unit support Installation manual CA-HM-UNI-EVO.004 | Version 2.0...
Page 4
Pull the screen neck towards the screen holder Slide the connector cover in the back of the screen until it ‘clicks’ into place and fix the screw (included with SPH-EVO82DAB) Install the front cover with the chrome bezel Final product image Installation manual CA-HM-UNI-EVO.004 | Version 2.0...