Error Code Definition - BAFANG M300 Manual

FiSHAW 2020

8 ERROR CODE DEFINITION

The HMI can show the faults of Pedelec. When a fault is detected, the icon
following error codes will be indicated too.
Note: please read carefully the description of the error code. When the error code appears, please first restart the sys-
tem. If the problem is not eliminated, please contact your dealer or technical personnel.
Error Explanation
The throttle is not back in correct
04
position.
05 The throttle has fault.
07 Over Voltage Protection
Fault with hall sensor/signal inside
08
of motor
09 Fault with motor phase lines
The temperature inside of motor
10
reaches to the max protection value
The temperature sensor of motor
11
has fault
Fault with current sensor inside
12
controller
Fault with temperature sensor inside
13
of battery
The temperature inside of controller
14
reaches to the max protection value
Fault with temperature sensor inside
15
of controller
CONSUMER MANUAL – DP C18.CAN
Troubleshooting
Check the throttle can be back in correct posi-
tion, if the situation does not improve, please
change a new throttle.
1. Check the connector or cable of throttle
whether they are properly or securely installed;
2. Disconnect the throttle, If the problem is
not eliminated, please contact your dealer or
professional.
1. Re-install or replace the battery;
2. If the problem is not eliminated, please
contact your dealer or professional.
Stop to ride and bring your Pedelec to your
dealer or to a specialist to have the error fixed.
Stop to ride and bring your Pedelec to your
dealer or to a specialist to have the error fixed.
Stop to ride and make the e-bike for a rest.
Stop to ride and bring your Pedelec to your
dealer or to a specialist to have the error fixed.
Stop to ride and bring your Pedelec to your
dealer or to a specialist to have the error fixed.
Stop to ride and bring your Pedelec to your
dealer or to a specialist to have the error fixed.
Stop to ride and bring your Pedelec to your
dealer or to a specialist to have the error fixed.
Stop to ride and bring your Pedelec to your
dealer or to a specialist to have the error fixed.
15
ERROR CODE DEFINITION
will be indicated and one of the