Fujitsu LIFEBOOK U748 Operating Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. LIFEBOOK U748
  6. Operating manual

Fujitsu LIFEBOOK U748 Operating Manual

Hide thumbs Also See for LIFEBOOK U748:
Table of Contents

Advertisement

Quick Links

System
Operating Manual
FUJITSU LIFEBOOK U728
FUJITSU LIFEBOOK U748
FUJITSU LIFEBOOK U758

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu LIFEBOOK U748

Summary of Contents for Fujitsu LIFEBOOK U748

  • Page 1 System Operating Manual FUJITSU LIFEBOOK U728 FUJITSU LIFEBOOK U748 FUJITSU LIFEBOOK U758...
  • Page 2 Internet at: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk ("http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
  • Page 4 Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2018. All rights reserved. Publication Date 02/2018 Order No.: A26391-K470-Z320-1-7619, edition 1...
  • Page 5 FUJITSU LIFEBOOK U728 FUJITSU LIFEBOOK U748 FUJITSU LIFEBOOK U758 Operating Manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility...
  • Page 6 Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.

  • Page 7: Table Of Contents

    FUJITSU LIFEBOOK U728 ........
  • Page 8 Installing a hard disk ..............77 Fujitsu...
  • Page 9 Index ................. . 93 Fujitsu...
  • Page 10 Contents Fujitsu...

  • Page 11: Innovative Technology

    The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.

  • Page 12: Notational Conventions

    "Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...

  • Page 13: Ports And Controls

    This chapter presents the individual hardware components of your device. It gives an overview of the indicators and ports of the device. Please familiarise yourself with these components before you start to work with the device. FUJITSU LIFEBOOK U728 Front 1 = Microphone (optional)
  • Page 14 3 = USB 3.1 Gen1 port with charging ™ function (USB Type-C 6 = SmartCard reader (optional) Right side 1 = USB 3.1 Gen1 port (USB Type-A) 3 = VGA monitor port 2 = Displayport 4 = Security Lock device Fujitsu...
  • Page 15 Ports and controls Bottom 1 = Battery (SIM card under the battery) 4 = Memory service compartment 2 = Battery release 1 5 = Port Replicator port 3 = Service compartment M.2 module 6 = Battery release 2 and LTE module Fujitsu...

  • Page 16: Fujitsu Lifebook U748

    Ports and controls FUJITSU LIFEBOOK U748 Front 1 = Microphone (optional) 7 = ON/OFF button 2 = WebCam (optional) 8 = Fingerprint sensor (optional) or palm vein sensor (optional) 3 = WebCam LED (optional) 9 = Memory card slot 4 = Touchpad...
  • Page 17 5 = SmartCard reader (optional) 3 = USB 3.1 Gen1 port with charging ™ function (USB Type-C Right side 1 = Headset port 4 = LAN port 2 = USB 3.1 Gen1 port (USB Type-A) 5 = Security lock device 3 = Displayport Fujitsu...
  • Page 18 Ports and controls Bottom 1 = Battery (SIM card under the battery) 4 = Memory service compartment 2 = Battery release 1 5 = Port replicator port 3 = Service compartment M.2 module 6 = Battery release 2 and LTE module Fujitsu...

  • Page 19: Fujitsu Lifebook U758

    Ports and controls FUJITSU LIFEBOOK U758 Front 1 = Microphone (optional) 8 = Separate numeric keypad 2 = WebCam (optional) 9 = Fingerprint sensor (optional) or palm vein sensor (optional) 3 = WebCam LED (optional) 10 = Memory card slot...
  • Page 20 3 = USB 3.1 Gen1 port with charging ™ function (USB Type-C Right side 1 = Headset port 4 = HDMI port 2 = USB 3.1 Gen1 port (USB Type-A) 5 = LAN port 3 = Displayport 4 = Security lock device Fujitsu...
  • Page 21 1 = Battery (SIM card under the battery) 4 = Memory service compartment 2 = Battery release 1 5 = Port Replicator port 3 = Service compartment for hard disk (HDD 6 = Battery release 2 or M.2 module) and LTE module Fujitsu...

  • Page 22: Important Notes

    "Removing and installing components during servicing", Page This notebook complies with the relevant safety regulations for data processing equipment. If you have questions about using your notebook in a particular area, please contact your sales outlet or our Hotline/Service Desk. Fujitsu...

  • Page 23: Additional Safety Notes For Devices With Wireless Components

    You will then be able to work for longer before having to recharge the battery. Energy efficiency is increased and the environmental impact is reduced. You save money while protecting the environment. Energy saving under Windows ► Make use of the power management features (see ""Using the power-management features", Page 42"). Fujitsu...

  • Page 24: Travelling With Your Notebook

    ► Unplug the mains adapter and all external devices from the power socket. ► Disconnect the mains adapter cable and the data cables for all external devices. ► Close the LCD screen. ► To protect against damaging jolts and bumps, use a notebook carrying case to transport your notebook. Fujitsu...

  • Page 25: Cleaning The Notebook

    The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. You can use disinfectant wipes to clean the keyboard and the touchpad. Ensure that no liquid enters the device. Fujitsu...

  • Page 26: First-Time Setup Of Your Device

    ► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu...

  • Page 27: Selecting A Location

    ► Connect the power cable (1) to the mains adapter. ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...

  • Page 28: Switching On The Device For The First Time

    If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet under "http://www.fujitsu.com/fts/support/". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".

  • Page 29: Working With The Notebook

    Please refer to the notes in "Important notes", Page Status indicators Statusindicators The status indicators provide information about the status of the power supply, the hard disk and the keyboard functions. Fujitsu...
  • Page 30 "Function keys and key combinations", Page 32). Num Lock indicator Indicator Num Lock Indicator is illuminated: The key has been pressed. The virtual numerical keypad is activated. You can output the characters indicated on the upper right of the keys. Fujitsu...
  • Page 31 In the case of overlay keys, the character printed on the upper left of the key will appear when that key is pressed. Scroll Lock indicator Indicator ScrollLock Indicator is illuminated: the key combination has been pressed. The effect that this key has varies between applications. Fujitsu...

  • Page 32: Switching On The Notebook

    Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. Notebook ► If the notebook does not switch itself off automatically, press the ON/OFF button for about five seconds. ► Close the LCD screen. Fujitsu...

  • Page 33: Keyboard

    The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Alt Gr Fujitsu...
  • Page 34 The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor control Windows key The Windows key switches between the start screen and the last used application. Windowskey Menu key The Menu key opens the menu for the active application. Fujitsu...

  • Page 35: Virtual Numeric Keypad

    Numeric keypad Virtualnumerickeypad Num Lock LIFEBOOK U728 and LIFEBOOK U748 have virtual number blocks, LIFEBOOK U758 has a separate number block. To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual numeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbers and symbols printed in the upper right corner of each key.

  • Page 36: Separate Number Block

    Numeric keypad Separatenumeric keypad Num Lock LIFEBOOK U728 and LIFEBOOK U748 have virtual number blocks, LIFEBOOK U758 has a separate number block. The keyboard of your notebook has a separate number block on the far right. Function keys and key combinations...
  • Page 37 This function key takes a screenshot of the current screen display and saves it to the clipboard. Num Lock This function key activates the virtual number block. The characters found on the upper right of the keys are then output. Fujitsu...

  • Page 38: Keyboard With Background Lighting (Optional)

    Country and keyboard settings ► Change the country and keyboard settings as described in the documentation for your operating system. Fujitsu...

  • Page 39: Touchpad And Touchpad Buttons

    ► Tap the touchpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the field you wish to select. Touchpad ► Tap the touchpad twice or press the left button twice. The command is executed. Fujitsu...

  • Page 40: Dragging Items

    LCDscreen Notes High-quality LCD screens (TFT) are installed in Fujitsu notebooks. For technical reasons, these screens are manufactured for a certain resolution. An optimum and sharp image can only be ensured with the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear picture.

  • Page 41: Using Fingers

    fingers together. Input fields Data must be entered for some apps, for instance an Internet page or your name and password. ► Tap on the input field. An on-screen keyboard opens, with which you can enter your data. Fujitsu...

  • Page 42: Webcam

    LCD screen may flicker while the light level is adjusted. Further information on using the webcam and on the additional settings which are possible for your webcam can be found in the help function of the program which uses the webcam. Fujitsu...

  • Page 43: Rechargeable Battery

    If you do not intend to use a battery for long periods of time, remove it from the notebook. Never store a battery in the device. If the device will not be used for a period of more than two days, remove the batteries from the device so that their state of charge is maintained. Fujitsu...

  • Page 44: Removing And Installing The Battery

    Make sure that no foreign bodies get into the battery connections. Never store a battery for long periods in the discharged state. This can make it impossible to recharge. The LIFEBOOK U748 is shown below. The procedure is the same for all three device variants. Removing a battery ►...
  • Page 45 ► Position the battery at the edge. ► Insert the battery into the battery compartment until it engages positively (1) ► Slide the locking device (2) in the direction of the arrow. ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...

  • Page 46: Using The Power-Management Features

    If you do not intend to use your notebook for a long period of time: ► Exit power saving mode if necessary via the mouse or keyboard or by switching on the notebook. ► Close all opened programs and completely shut down the notebook. Fujitsu...

  • Page 47: Memory Cards

    (see the documentation for your operating system). ► On devices with card locking: Press on the memory card (1). Memory card The memory card is released and can now be removed. ► Pull the memory card out of the slot (2). Fujitsu...

  • Page 48: Loudspeakers And Microphones

    If you attach an external microphone, the built-in microphone is disabled. When you connect headphones or external speakers, the built-in speakers are disabled. Information on connecting headphones and a microphone can be found "Connecting external devices", Page Fujitsu...

  • Page 49: Sim Card

    Working with the notebook SIM card The LIFEBOOK U748 is shown below. The procedure is the same for all three device variants. All device variants support cards in micro-SIM format (15 mm x 12 mm). A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or notebook and, together with an integrated LTE module, enables access to a mobile radio network.
  • Page 50 ► Pull the SIM card holder out of the slot (2). ► Insert the SIM card (3) into the SIM card holder as shown in the diagram on the SIM card holder. ► Push the SIM card holder back into the slot (4). Fujitsu...

  • Page 51: Removing The Sim Card

    Removing the SIM card ► Prepare for removal of the SIM card, see chapter "Preparing to remove components", Page ► Remove the battery, see "Removing a battery", Page ► Snap the locking mechanism in the direction of the arrow (1). Fujitsu...
  • Page 52 Working with the notebook ► Pull the SIM card holder out of the slot (2). ► Remove the SIM card from the SIM card holder (3). ► Push the SIM card holder back into the slot (4). Fujitsu...

  • Page 53: Wireless Components Wireless Lan / Bluetooth / Lte

    ► Complete the removal, see chapter "Finishing component removal", Page Wireless components Wireless LAN / Bluetooth / LTE The installation of radio components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off ►...

  • Page 54: Setting Up Wlan Access

    Access via LTE You can purchase the accessories for LTE reception from your retailer or your Fujitsu Technology Solutions dealer. If you have ordered an LTE module, your device will already be prepared when you receive it.

  • Page 55: Ethernet And Lan

    Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Use a shielded network cable (CAT 5e). Fujitsu...

  • Page 56: Your Port Replicator

    13 = Security Lock device 5 = Unlocking lever 6 = DC jack socket (DC IN) 7 = USB 3.1 Gen1 port with charging function (USB Type-C™) The DVI port and the neighbouring Displayport cannot be used at the same time. Fujitsu...

  • Page 57: Connecting The Notebook To The Port Replicator

    "Docked" mode. In this profile, for example, the setting is saved as to which monitor was last used for output. This profile will be loaded, as soon as the notebook is connected to a Port Replicator of the same type. Fujitsu...

  • Page 58: Switching On The Notebook Via The Port Replicator

    ► Turn the key in the direction of the arrow (1) to unlock the port replicator. ► Pull the unlocking lever in the direction of the arrow (2), until you hear the notebook unlatch. ► Lift off the notebook (3). Fujitsu...

  • Page 59: Security Functions

    ► You must install the fingerprint software in order to be able to use the fingerprint sensor (1). The current Workplace Protect software for palm and fingerprint sensors can be found on the Internet at "http://www.fujitsu.com/fts/solutions/business-technology/security/secure/index.html". Fujitsu...

  • Page 60: Configuring The Palm Vein Sensor

    Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook.

  • Page 61: Configuring Password Protection In Bios Setup Utility

    The notebook is then rebooted and the new password comes into effect. It will now be necessary to first enter your supervisor or user password in order to open the BIOS Setup Utility. Please note that the user password only provides access to a few of the BIOS settings. Fujitsu...

  • Page 62: Password Protection For Booting Of The Operating System

    ► Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. ► Select the Save Changes & Exit option under Exit. The notebook will reboot. The system is no longer password-protected. Fujitsu...

  • Page 63: Password Protection For The Hard Disk

    ► Select the "Security Chip" "Disabled" entry to deactivate the TPM ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. Your notebook will now restart and TPM will be disabled. Fujitsu...

  • Page 64: Smartcard Reader

    SmartCard with you. In order to be able to take advantage of all the security features of your notebook, you will need a CardOS SmartCard from Fujitsu. The SmartCard can only be used with a PIN, offering maximum protection even if you lose the SmartCard.

  • Page 65: Connecting External Devices

    For more information about whether or not devices need to be switched off, please refer to the documentation supplied with the external device. Some of the external devices require special drivers (see the operating system and external device documentation). Fujitsu...

  • Page 66: Connecting An External Monitor

    "Function keys and key combinations", Page You can display the same picture on the external monitor and the notebook LCD monitor simultaneously. If you wish to operate the monitor via a DVI port, use the optional Port Replicator available for your notebook. Fujitsu...

  • Page 67: Hdmi Port

    The HDMI port on your notebook can be used to connect an external amplifier, LCD TV or a plasma TV with an HDMI connection. ► Connect the data cable to the external device. ► Connect the data cable to the HDMI port of the notebook. Fujitsu...

  • Page 68: Connecting Usb Devices

    Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu...

  • Page 69: Usb Connection With Charging Function (Usb Type-C)

    USB devices while the system is running. Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port (USB Type-C) of the notebook. Fujitsu...

  • Page 70: Usb Port With Charging Function (Anytime Usb Charge)

    ► Left click on the icon to safely remove hardware, located in the taskbar. ► Select the device which you want to shut down and remove. ► Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu...

  • Page 71: Headset Port

    If you buy a cable from a retailer, please note the following information: The headset port on your notebook is a "3.5 mm jack socket". If you want to connect a headset, headphones or loudspeakers, you will need a "3.5 mm jack plug". Fujitsu...

  • Page 72: Removing And Installing Components During Servicing

    The equipment and tools you use must be free of static charges. • Remove the power plug from the mains supply before inserting or removing boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards fitted with ESDs. Fujitsu...

  • Page 73: Preparing To Remove Components

    Otherwise, there is a risk of suffering burns! As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page Fujitsu...

  • Page 74: Removing A Cover

    ► Lift the cover off the notebook (2). Removing memory modules ► Carefully push the two mounting clips outwards (1). Memory expansion Memory module The memory module snaps upwards (2). ► Pull the memory module out of its slot in the direction of the arrow (3). Fujitsu...

  • Page 75: Installing A Memory Module

    ► Carefully push the memory module downwards until you feel it click into place (2). Attaching the cover ► Place the cover in the correct mounting position (1). ► Tighten the screw (2). ► Complete the installation, see "Finishing component removal", Page Fujitsu...

  • Page 76: Installing And Removing An M.2 Module

    Removing and installing components during servicing Installing and removing an M.2 module LIFEBOOK U728 and LIFEBOOK U748 each have a service compartment for an M.2 module. In LIFEBOOK U758, you can either install an M.2 module (with a corresponding M.2 adapter) or a standard hard disk (HDD, without M.2 adapter). To do so, see "Removing...

  • Page 77: Installing An M.2 Module

    ► LIFEBOOK U758: If you wish to install an HDD hard disk instead of another M.2 module, remove the M.2 adaptor (under the M.2 module) from the service compartment and install the HDD; see "Removing and installing hard disks (HDD, LIFEBOOK U758 only)", Page Fujitsu...

  • Page 78: Attaching The Cover

    Removing and installing components during servicing Attaching the cover ► Place the cover in the correct mounting position (1). ► Tighten the screws (2). Fujitsu...

  • Page 79: Removing And Installing Hard Disks (Hdd, Lifebook U758 Only)

    For easier removal from the device, the hard disk is installed in a hard disk carrier. ► Pull the hard disk in direction of the arrow (1). ► Loosen the connector of the hard disk (2). ► Remove the hard disk from the hard disk compartment. Fujitsu...
  • Page 80 ► If you wish to install an M.2 module instead of another HDD hard disk, release the hard disk connector from the mainboard, insert the M.2 adaptor into the service compartment and install the M.2 module; see "Removing and installing hard disks (HDD, LIFEBOOK U758 only)", Page Fujitsu...

  • Page 81: Installing A Hard Disk

    ► Slide the hard disk into the hard disk carrier. ► Attach the connector to the hard disk (2). ► Place the hard disk into the hard disk compartment (3). ► Connect the hard disk connector to the mainboard. ► Re-fasten the cover, see "Attaching the cover", Page Fujitsu...

  • Page 82: Finishing Component Removal

    ► Install the battery again (see "Installing a battery", Page 41). ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that you disconnected before. Fujitsu...

  • Page 83: Settings In Bios Setup Utility

    ► Press the function key ► If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service centre. The BIOS Setup Utility starts. Fujitsu...

  • Page 84: Operating Bios Setup Utility

    ► Select the option you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...

  • Page 85: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...

  • Page 86: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"...

  • Page 87: Restoring The Hard Disk Contents Under Windows

    Hotline/Service Desk. When certain characters are entered on the keyboard, only numerals are written Cause Troubleshooting ► Press the The virtual numeric keypad of your device is key. activated, see "Virtual numeric keypad", Page 31 Fujitsu...

  • Page 88: The Notebook's Lcd Screen Remains Blank

    ► Check whether the data cable is properly connected to the notebook and the external monitor (if it is plugged in with a connector). ► Switch on the external monitor and the notebook. Fujitsu...

  • Page 89: The External Monitor Is Blank Or The Image Is Unstable

    The battery is dead. ► Insert a charged battery. ► Connect the mains adapter to the notebook. ► Check whether the mains adapter is The power adapter is not connected correctly. connected correctly to the notebook. ► Switch the notebook on. Fujitsu...

  • Page 90: The Notebook Stops Working

    ► Check whether the wireless connection is The wireless component is enabled. Despite this, the wireless connection to a network does switched on via the software. not work. ► Further information on using the wireless component can be found in the help files. Fujitsu...

  • Page 91: Smartcard Reader Is Not Recognised

    Supervisor PIN. SmartCard lost Cause Troubleshooting ► If you are working in a network, contact your SmartCard lost system administrator, who can boot up your notebook with a Supervisor SmartCard. Fujitsu...

  • Page 92: Error Messages On The Screen

    Press <F1> to resume, <F2> to SETUP function key to start the operating system. This error message appears if an error occurs ► Press the function key to access the during the self-test before starting the operating BIOS Setup. system. Fujitsu...
  • Page 93 System battery is dead - Replace and run SETUP service centre. ► Contact your sales outlet or our customer System cache error - Cache disabled service centre. ► Contact your sales outlet or our customer System timer error service centre. Fujitsu...

  • Page 94: Technical Data

    2400 MHz for Quad Core CPU SO-DIMM The data sheet for the device provides further technical data. You will find the data sheet on your device or on the Internet at "http://www.fujitsu.com/fts/support/". Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://www.fujitsu.com/fts/support/".

  • Page 95: Mains Adapter

    Secondary Nominal power 65 W / 80 W / 90 W Rated voltage 19 V Max. rated current 3.42 A / 4.22 A / 4.74 A An additional mains adapter or power cable can be ordered at any time. Fujitsu...

  • Page 96: Manufacturer's Notes

    Manufacturer’s notes Disposal and recycling Notes You can find information on this subject on your notebook or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/"). Other certification markings Certification markings Any other certification markings are listed in the "Manual Appendix - Additional Certifications" supplement.

  • Page 97: Index

    82 Components Fingerprint sensor 55 installing / removing 68 configure 55 Configuration, BIOS Setup Utility 79 First-time setup Connecting audio devices 67 Fn key 30 Connecting headphones 67 Ctrl+Alt+Del 34 Cursor control 30 Getting started 22 Cursor keys 30 Fujitsu...
  • Page 98 Operating system, restoring 83 setting up 23 Mechanical backup 56 Memory card Packaging 22 handling 43 Palm vein sensor 56 inserting 43 Configuring 56 removing 43 Password Memory expansion changing 58 installing 71 entering 57 removing 70 removing 58 Fujitsu...
  • Page 99 Using the Kensington Lock Cable 56 Memory cards 43 Standby indicator 26 Status indicators 25 VGA connection socket 62 Supervisor password Virtual numeric keypad 31 changing 58 Volume entering 57 decrease 33 removing 58 increase 33 Switching on Volume control 44 Fujitsu...
  • Page 100 Index switch on 33 Webcam 38 Wireless LAN Windows key 30 Switching the module off 49 Wireless component: Switching the module on 49 safety notes 19 Wireless LAN: Wireless components safety notes 19 switch off 33 Fujitsu...

This manual is also suitable for:

Lifebook u728Lifebook u758

Table of Contents