Replacing The Date/Time Battery; Replace The Battery - Canon EOS 350D Instruction Manual
Canon digital camera rebel xt, eos 350d
Hide thumbs
Also See for EOS 350D:
- Brochure & specs (8 pages) ,
- Instruction manual (213 pages) ,
- Owner's manual (15 pages)
Table of Contents
Advertisement
Replacing the Date/Time Battery
The date/time (back-up) battery maintains the camera's date and time.
The battery's service life is about 5 years. If the date/time is reset when
the battery is replaced, replace the back-up battery with a new CR2016
lithium battery as described below.
The date/time setting will also be reset, so you must set the
correct date/time.
(+)
For the date/time battery, be sure to use a CR2016 lithium battery.
38
1
Set the power switch to <2>.
2
Open the cover and remove the
battery.
3
Take out the battery holder.
4
Replace the battery.
(–)
¡
5
Insert the battery holder and
close the cover.
Make sure the battery is in the proper
+ – orientation.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the EOS 350D and is the answer not in the manual?
Questions and answers
how do you use the remote control to take still photos
To use the remote control with the Canon EOS 350D to take still photos:
1. Set the Drive Mode: Press the Drive Mode Selection Button on the camera and set it to the TIMER/REMOTE mode.
2. Connect the Remote Shutter Cable: Insert the 2.5mm stereo jack of the remote shutter cable into the remote shutter socket on the camera.
3. Trigger the Remote Shutter: Use your remote control or connected device to send a signal to the camera to open the shutter.
Note: By default, the camera may initiate a 10-second countdown before taking the exposure. This behavior is part of the TIMER/REMOTE mode.
This answer is automatically generated