Blueridge BMKH09M-LM Owner's Manual page 14

●
Having set X-FAN function on: After turning off the
unit by pressing "
running for a few minutes at low speed. In this
period, hold fan speed button for 2s to stop indoor
fan directly.
●
Having set X-FAN function off: After turning off the
unit by pressing "
be off directly.
button
SWING
Press this button can select up & down swing angle.
Fan blow angle can be selected circularly as below:
no display
(horizontal louvers
stops at current position)
● When selecting "
fan automatically. Horizontal louver will automat-
ically swing up & down at maximum angle.
● When selecting "
er is blowing fan at fixed position. Horizontal
louver will stop at the fixed position.
When selecting "
●
blowing fan at fixed angle. Horizontal louver will
send air at the fixed angle.
Hold " "button above 2s to set your required
●
swing angle. When reaching your required
angle, release the button.
NOTE
● " " may not be available. When air condi-
、 、
tioner receives this signal, the air conditioner will blow
fan automatically.
button
TURBO
Under cool or heat mode, press this button to turn
to quick cool or quick heat mode. "
displayed on remote controller. Press this button
again to exit turbo function and "
disappear.
/ button
Press "▲" or "▼" button once increase or decrease
set temperature 1℃(1°F). Holding "▲" o r "▼" button,
2s later, set temperature on remote controller will
" button, indoor fan will continue
" button, the complete unit will
", air conditioner is blowing
", air condition-
、 、 、 、
", air conditioner is
、 、
" icon will
change quickly. On releasing button after setting is
finished, temperature indicator on indoor unit will
change accordingly. (Temperature can't be adjust-
ed under auto mode)
When setting TIMER ON, TIMER OFF or CLOCK,
press "▲" or "▼" button to adjust time. (Refer to
CLOCK, TIMER ON, TIMER OFF buttons)
SLEEP
Under cool or heat mode, press this button to start
up sleep function. "
remote controller. Press this button again to cancel
sleep function and "
TEMP
By pressing this button, you can see indoor set
temperature, indoor ambient temperature or
outdoor ambient temperature on indoor unit's
display. The setting on remote controller is selected
circularly as below:
●
When selecting "
controller, temperature indicator on indoor unit
displays set temperature.
●
When selecting "
perature indicator on indoor unit displays indoor
ambient temperature.
● When selecting "
temperature indicator on indoor unit displays
outdoor ambient temperature.
NOTE
●
Outdoor temperature display is not available for some
models. At that time, indoor unit receives "
signal, while it displays indoor set temperature.
'
●
It s defaulted to display set temperature when turning
" icon is
on the unit. There is no display in the remote control-
ler.
●
Only for the models whose indoor unit has dual-8
display.
●
When selecting displaying of indoor or outdoor ambi-
ent temperature, indoor temperature indicator
displays corresponding temperature and automatical-
ly turn to display set temperature after three or five
seconds.
8
button
" icon is displayed on
" icon will disappear.
button
no display
" or no display with remote
" with remote controller, tem-
" with remote controller,
"