Maintenance; Note On The Time To Replace The Lamp; Cleaning The Air Filter - Sony VPL-X1000U Operating Instructions Manual

Lcd data projector
Hide thumbs Also See for VPL-X1000U:
Table of Contents

Advertisement

Maintenance

Note on the Time to Replace the
Lamp
When it is time to replace the lamp, replace the lamp
promptly with a new LMP-600 Projector Lamp.
For details on replacement, refer to the instruction manual
supplied with the LMP-600 Projector Lamp.

Cleaning the Air Filter

The air filter should be cleaned every 300 hours. When
it becomes difficult to remove the dust from the filter,
replace the filter with a new one.
To clean the air filter, follow the steps below:
1
Turn off the power and unplug the power cord.
2
Remove the air filter cover on the bottom of the
projector.
3
Remove the air filter.
4
Remove the dust from the filter with a vacuum
cleaner.
5
Attach the air filter and replace the cover.
Notes
• If the air filter is excessively dirty, wash it with a
mild detergent solution and dry it in a shaded place.
If the dust cannot be removed, replace the air filter
with the supplied new one.
• Be sure to attach the air filter cover firmly; the power
will not be turned on if it is not closed securely.
37
(EN)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vpl-x1000eVpl-x1000m

Table of Contents