Before Installation; Using The Basketball Equipment; Attaching The Basketball Net - Bee-Ball ZY022 Instruction Manual

Before Installation

Check all parts are present!
Our factory takes every effort to make sure everything is packed in its proper place. But just in case a small part has gone
astray please make sure you check every piece is present before you begin installing - right down to the nuts and bolts.
Assemble with Care
Installation should be completed by two adults. Please make sure you follow all the instructions carefully. If you have any
questions during installation please do not hesitate to contact us on +441865 392439 or email
sales@biggamehunters.co.uk and we will be happy to advise.
Please make sure you read all the safety warnings and advice in this instruction manual. Take extra care and attention over
the wall fixing instructions once you have completed the assembly as this will make your equipment is firmly attached.
Make sure you position the backboard somewhere with plenty of space to play.

Using the Basketball Equipment

Improper installation or use of the basketball backboard and flex ring may cause damage to the system or result in serious
injury to the user. We would advise that children are supervised at all times when using this product.
Please adhere to the warnings below to ensure proper use of this equipment and ultimately to ensure full enjoyment!

Attaching the Basketball Net

When attaching the net to your basketball hoop, make sure you have
the net the correct way up. The wider loops/wider part of the net
should be at the top. Slide the loops of the net over the metal loops on
the inside of the basketball hoop - from the inside towards the
outside (see diagram 1). You can also see here a net that has been
assembled correctly and one that has been assembled upside down!
Correct
diagram 1
Incorrect
2