Robit V7S Pro Quick Operation Manual

Robit V7S Pro Quick Operation Manual

Advertisement

Attention Before Use

Please neatly arrange desks, chairs and household appliances to prevent the robot
getting stuck during cleaning.
Please do not stand in such narrow areas as doorways and aisles in case the robot
fails to clean these areas.
The messy power cords, toys and other objects on the floor may entangle the robot,
please kindly organize them.
Remove the white protective strip and the transparent protective film on the infrared
front bumper before using. Otherwise, the robot may not work properly.

Charging the Robot

Preparation before charging

Before installing the charging base, remove the protective film on the charging
Base, and wipe the installation ground till clean.
Quick Operation Guide
Robit V7S Pro
Robot Vacuum Cleaner
English
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V7S Pro and is the answer not in the manual?

Questions and answers

Summary of Contents for Robit V7S Pro

  • Page 1 English Robit V7S Pro Robot Vacuum Cleaner Quick Operation Guide Attention Before Use Please neatly arrange desks, chairs and household appliances to prevent the robot getting stuck during cleaning. Please do not stand in such narrow areas as doorways and aisles in case the robot fails to clean these areas.
  • Page 2 Place the charging base on a hard, level surface and against the wall. Remove objects within 3ft/ 1m of the left and right side and within 6ft/ 2m of the front charging base. Please do not place objects with strong reflecting surfaces around the charging base, such as mirrors.
  • Page 3 Start-cleaning Press the start-stop button on the robot or on the remote control to start auto AUTO cleaning mode. During the auto cleaning process, the robot automatically perceives the missing area and then makes up intelligently. During the working process, the robot will carry out route planning independently. Moved by human or remote control, the robot will redesign the route and clean up the area that have been cleaned.
  • Page 4 After finished cleaning, turn the power switch in the side of the robot to “0”. The indicator goes off and robot is power off. 【This guide is not a substitute for instructions. Please refer to instructions if you need to learn further details and guidelines.】...

Table of Contents