Table of Contents
Advertisement
Available languages
Available languages
16aaaEnglish
Cleaning the filter (SCF293)
1
Detach the filter cover from
the base.
2 Take out the filter and clean
it under tap water.
3 Let the filter air dry thoroughly.
Put it back to the base and
close the filter cover.
Note: Clean the filter at least
every 4 weeks to ensure that it
continues to filter effectively.
Descaling
The sterilization process is extremely important to ensure the most hygienic
standards for your baby. Limescale deposits can slow down the sterilization cycle
and even impair its effectiveness.
Limescale is the hard and chalky deposit. Depending on the water type in your
area, limescale can have different appearances ranging from snow white looking
powder to brownish stains. The harder the water, the faster scale builds up. It builds
up in appliances as the residue of minerals naturally contained in water, which
fail to evaporate when water is heated. Although it is not harmful as such, it is
unsightly, hard to clean and can impair the operation of appliances or damage their
components if allowed to build up.
Descale the sterilizer at least every 4 weeks to ensure it works efficiently.
1
Pour 90ml/3oz of white vinegar (5% acetic acid) and
30ml/1oz of water into the water reservoir.
2 Place the small basket on the base. Place the lid on top
of the small basket.
3 SCF291: Press the power on button to switch on the
appliance.
SCF293: Turn the on/off button to "Sterilize" mode. Then
press it to switch on the appliance.
Note: Place the small basket on the base to prevent hot
liquid from splashing out.
Englishaaa17
Advertisement
Table of Contents
