12. Remove the flexible cables from the connectors (SN21,
SN22, SN23, SN24, SN25, SN26).
13. Disconnect the connectors (SN2, SN3).
14. Remove the flexible cables from the connector (SN20).
15. Remove 6 screws and then remove SN-Board.
16. Disconnect the connector (SS11).
17. Remove the flexible cables from the connectors (C23,
SS52, SS55).
18. Remove 3 screws and then remove SS-Board.
19. Disconnect the connectors (C25, D25).
20. Remove the flexible cables from the connectors (C11,
C21).
21. Remove 4 screws and then remove D-Board.
22. Remove 5 screws and then remove P-Board.
23. Remove the flexible cable from the connectors (C10,
C20).
24. Remove 7 screws ( ).
Note: when fixing Handle Fixing Metal (L, R)
• Screw on 2 screws (1) firstly.
25. Pull the bottom of the Plasma Display Panel forward
(arrow1).
27
TH-50PH30E / TH-50PH30ER