Related Manuals for Samsung harman/kardon HWQ90RXY
Summary of Contents for Samsung harman/kardon HWQ90RXY
- Page 1 FULL MANUAL HW-Q90R Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register...
- Page 2 BLADE OF PLUG TO WIDE SLOT, FULLY Refer to the table below for an explanation of INSERT. symbols which may be on your Samsung product. • This apparatus shall always be connected to a AC outlet with a protective grounding connection.
- Page 3 It is for personal use only. Condensation You can access the FULL MANUAL on may occur if your product has been stored in Samsung’s on-line customer support centre by cold temperatures. If transporting the unit scanning the QR code. To see the manual on...
-
Page 4: Table Of Contents
CONTENTS Checking the Components Inserting Batteries before using the Remote Control (AA batteries X 2) ------------------------- Product Overview Front Panel / Top Panel of the Soundbar ------------------------- Bottom Panel of the Soundbar ------------------------- Connecting the Soundbar Connecting Electrical Power ------------------------- Connecting the Soundbar to the Subwoofer and Surround Speakers ------------------------- –... - Page 5 Connecting an Amazon product Connect and use with an Amazon product (Amazon Echo) ------------------------- Use voice commands to control the Soundbar ------------------------- Using the Remote Control How to Use the Remote Control ------------------------- Adjusting the Soundbar volume with a TV remote control ------------------------- Using the Hidden Buttons (Buttons with more than one function) -------------------------...
-
Page 6: Checking The Components
5. • To distinguish the left surround speaker from the right, check the label on the rear of each speaker. • To purchase additional components or optional cables, contact a Samsung Service Centre or Samsung Customer Care. • The appearance of the accessories may differ slightly from the illustrations above. -
Page 7: Product Overview
02 PRODUCT OVERVIEW Front Panel / Top Panel of the Soundbar Position the product so that the "Samsung Harman Kardon" logo Panel is located on the top. (Power) Button Turns the power on and off. • Auto Power Down Function The unit turns off automatically in the following situations: –... -
Page 8: Bottom Panel Of The Soundbar
Bottom Panel of the Soundbar DIGITAL AUDIO IN DIGITAL AUDIO IN DIGITAL AUDIO IN (OPTICAL) (OPTICAL) (OPTICAL) SERVICE SERVICE SERVICE POWER POWER POWER ID SET ID SET ID SET HDMI IN 1 HDMI IN 1 HDMI IN 1 (WOOFER/REAR) (WOOFER/REAR) (WOOFER/REAR) NETWORK NETWORK... -
Page 9: Connecting The Soundbar
03 CONNECTING THE SOUNDBAR Connecting Electrical Power Use the power components (1, 2, 3) to connect the Subwoofer, Surround Speaker, and Soundbar to an electrical outlet in the following order: 1 Connect the power cord to the Subwoofer. 2 Connect the power cord to the Left and Right Surround Speakers. 3 Connect the power cord to the Soundbar. -
Page 10: Connecting The Soundbar To The Subwoofer And Surround Speakers
Soundbar unit is connected properly. Connect again. See the instructions for Connection failed manual connection on page 7. Red and See the contact information for the Blinking Malfunction blue Samsung Service Centre in this manual. ENG - 6... -
Page 11: Manually Connecting The Subwoofer Or Surround Speakers If Automatic Connection Fails
• The ID SET message appears on the display of the Soundbar for a moment, and then it disappears. • The Soundbar will automatically power on when ID SET is complete. 5 Sec “Samsung Harman Kardon” logo is on the top ID SET ENG - 7... - Page 12 3. Check if the LINK LED is solid blue (connection complete). When the connection is successfully LINK LED - Blue is On established, the blue indicators on the rear of the subwoofer and surround speakers turn on without blinking. NOTES •...
-
Page 13: Connecting To Your Tv
04 CONNECTING TO YOUR TV Hear TV sound from your Soundbar through wired or wireless connections. • When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control. – This feature is available on 2017 and later Samsung Smart TVs that support Bluetooth when the Soundbar is connected to the TV using an optical cable. -
Page 14: Connecting Using An Optical Cable
• If “TV ARC” does not appear in the display window of the Soundbar main unit, confirm that the HDMI cable is connected to the correct port. • Use the volume buttons on the TV’s remote control to change the volume on the Soundbar. NOTES •... -
Page 15: Method 2. Connecting Wirelessly
2. Select Bluetooth mode on the TV. (For more information, see the TV’s manual.) 3. Select “[AV] Samsung Soundbar Q90R” from the list on TV’s screen. An available Soundbar is indicated with “Need Pairing” or “Paired” on the TV’s Bluetooth device list. - Page 16 If the device fails to connect • If a previously connected Soundbar (e.g. “[AV] Samsung Soundbar Q90R”) appears in the list, delete • Then repeat steps 1 through 3. NOTE • After you have connected the Soundbar to your TV the first time, use the “BT READY” mode to reconnect.
-
Page 17: Connecting Via Wi-Fi
Connecting via Wi-Fi Pre-connection Checklist 1. Confirm that your Samsung Smart TV was released after 2013. This function is compatible only with Samsung Smart TVs released after 2013. 2. Make sure your Wireless router (Wi-Fi) is ready and working. 3. Make sure that the TV is connected to the Wireless router (your Wi-Fi network). - Page 18 Soundbar, use the TV menu to connect the TV to the network again. For TVs released in 2019 Home ( ) Settings ( ) Sound Sound Output [AV] Samsung Soundbar Q90R (Wi-Fi) For TVs released in 2018 Home ( ) Settings ( ) ...
-
Page 19: Connecting An External Device
05 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired or wireless network to play the external device’s sound through the Soundbar. Connecting using an HDMI Cable (Capable of Dolby Atmos decoding and playback) • When you use Dolby Atmos®: If the input source is Dolby Atmos®, 7.1.4 channels are outputted. When Dolby Atmos®... -
Page 20: Connecting Using An Hdmi Cable
• Open the audio output options on the settings menu of your BD player or other device and make sure that “No Encoding” is selected for Bitstream. For example, on a Samsung BD Player, go to Home Menu → Sound → Digital Output and then select Bitstream (unprocessed). -
Page 21: Connecting Using An Optical Cable
Connecting using an Optical Cable Top of the Soundbar BD / DVD player / Set-top box / Game console D.IN DIGITAL AUDIO IN OPTICAL OUT Optical Cable (OPTICAL) (not supplied) Bottom of the Soundbar 1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT jack of the Source Device using a digital optical cable (not supplied). -
Page 22: Connecting A Mobile Device
3. Play music files from the device connected via Bluetooth through the Soundbar. If the device fails to connect • If a previously connected Soundbar (e.g. “[AV] Samsung Soundbar Q90R”) appears in the list, delete • Then repeat steps 1 and 2. - Page 23 • You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free) function. • Once you have paired the Soundbar to a Bluetooth device, selecting “[AV] Samsung Soundbar Q90R” from the device’s scanned devices list will automatically change the Soundbar to “BT” mode.
- Page 24 Disconnecting the Bluetooth device from a Soundbar You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s user manual. • The Soundbar will be disconnected. • When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display “BT DISCONNECTED”...
-
Page 25: Connecting Via Wi-Fi (Wireless Network)
Connecting via Wi-Fi (Wireless Network) • Connect a single Soundbar to Wi-Fi to access a variety of music streaming services and Internet radio. Connect multiple Soundbars to Wi-Fi to use grouped playback or the stereo sound mode. • To connect a Soundbar to a mobile device via a wireless network (Wi-Fi), the SmartThings app is required. - Page 26 3. Launch the app, and then follow the instructions on the screen to register (add) your Soundbar in the app. • The automatic pop-up (the third illustration below) may not be available on some mobile devices. If this is the case, select and complete “Add device” from the app menu . Your Soundbar is now added to the app.
-
Page 27: Connecting An Amazon Product
07 CONNECTING AN AMAZON PRODUCT • This feature may not be available in some countries. • This service is provided by Amazon and can be terminated at any time. Samsung does not assume responsibility for service availability. • Amazon Alexa app screen is subject to change without prior notice. - Page 28 2. In the Alexa app, search “Samsung Wireless Audio” in Skills, and then select “ENABLE”. • Skip this step if you have Skills set up already. Amazon Alexa app Select Skills Search Enable ENG - 24...
-
Page 29: Use Voice Commands To Control The Soundbar
Use voice commands to control the Soundbar • The Amazon Echo service you can use with your Soundbar is limited to music. Other services provided by Amazon Echo, such as news and weather, can only be accessed through your Amazon Echo product. Trigger + Command + Speaker name Use the Speaker name you changed in the SmartThings app. -
Page 30: Using The Remote Control
08 USING THE REMOTE CONTROL How to Use the Remote Control Turns the Soundbar on and off. Power Press to select a source connected to the Soundbar. PAIR Source Press the (Mute) button to mute the sound. Press it again to unmute the sound. PAIR PAIR Mute... - Page 31 Anynet+ and Auto Power Link are turned on and turned off by the Right and Left buttons respectively. – Anynet+ : If the Soundbar is connected to a Samsung TV through an HDMI cable, you can control your Soundbar with a Samsung TV remote control.
- Page 32 You can select TREBLE, BASS, SYNC, CENTER LEVEL, SIDE LEVEL, FRONT TOP LEVEL, REAR LEVEL, REAR TOP LEVEL, and VIRTUAL ON/OFF. – To control the volume of the treble or bass sound, select TREBLE or BASS in Sound Sound Control Settings, and then adjust the volume between -6~+6 by using the Up/Down buttons.
-
Page 33: Adjusting The Soundbar Volume With A Tv Remote Control
For more information, see the TV’s user manual. The default mode for this function is control by a Samsung TV remote. If your TV is not – Each time you push the WOOFER button a Samsung TV, follow the directions below to... -
Page 34: Using The Hidden Buttons (Buttons With More Than One Function)
Using the Hidden Buttons (Buttons with more than one function) Hidden Button Reference page Remote Control Button Function WOOFER TV remote control On/Off (Standby) page 29 Left Auto Power Link ON/OFF page 27 Right Anynet+ ON/OFF page 27 ID SET page 27 7 Band EQ page 28... -
Page 35: Installing The Wall Mount
09 INSTALLING THE Wallmount Components WALL MOUNT Wall Mount Guide Installation Precautions • Install on a vertical wall only. (M4 x L10) • Do not install in a place with high Holder-Screw Screw temperature or humidity. • Verify whether the wall is strong enough to support the product’s weight. - Page 36 2. Align the Wall Mount Guide’s Centre Line 5. Push a screw (not supplied) through each with the centre of your TV (if you are Holder-Screw, and then screw each screw mounting the Soundbar below your TV), and firmly into a support screw hole. then fix the Wall Mount Guide to the wall using tape.
-
Page 37: Installing The Surround Speakers On A Wall (Sold Separately)
Brackets and the speakers on the wall. • For more information, please refer to the Wall Mount’s manual. • Samsung Electronics is not liable for any damage to the product due to the product being installed inappropriately. • Take care not to install the speakers sideways or upside down. -
Page 38: Installing The Soundbar Above A Tv Stand
10 INSTALLING THE 11 SOFTWARE SOUNDBAR UPDATE ABOVE A TV When the Soundbar is connected to the Internet, STAND software updates automatically occur even when the Soundbar is turned off. • To use the Auto Update function, the Soundbar must be connected to the Internet. Component The Wi-Fi connection to the Soundbar will be terminated if the Soundbar’s power cord is... -
Page 39: Troubleshooting
12 TROUBLESHOOTING Before seeking assistance, check the following. The red LED on the subwoofer blinks and The unit will not turn on. the subwoofer is not producing sound. Is the power cord plugged into the outlet? This issue can occur if the subwoofer is not ;... -
Page 40: Licence
13 LICENCE ; Connected via Wi-Fi 1. Check if the TV is a compatible model. • Only Samsung Smart TVs released after 2013 are supported. 2. Check if the TV is connected to Wi-Fi. • If the TV is not connected to Wi-Fi, use... -
Page 41: Open Source Licence Notice
14 OPEN SOURCE LICENCE NOTICE For further information on Open Sources used in this product, please visit the website: http://opensource.samsung.com 15 IMPORTANT NOTES ABOUT SERVICE Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. -
Page 42: Specifications And Guide
AMPLIFIER Rated Output power 35W x 4 NOTES • Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. • Weight and dimensions are approximate. • For India Only “This product is RoHS compliant” Precaution : The Soundbar will restart automatically if you turn on/turn off Wi-Fi. - Page 43 © 2019 Samsung Electronics Co., Ltd. All rights reserved. Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Centre. Area Contact Centre Web Site ` Asia Pacifi c...