Table of Contents
Advertisement
If you want to cancel A.P.S. function, press
the “M” button.
If “OK” button is pressed, A.P.S. starts and
the following warning is displayed.
If you press the “M” button, A.P.S. function
stops and Program table appears on the
screen.
If you wait till A.P.S. is finalized, Program
table is displayed with the programmes found
and located.
teletext language
By pressing “ ” / “ ” button in the Settings
menu, select teletext language. There are
three options to select : Europe, Cyrillic and
Greek.
teletext region
By pressing “ ” / “ ” button in the Settings
menu, select teletext region. There are two
options to select : West and East.
All manuals and user guides at all-guides.com
- 17 -
Other Features
TV Status
Programme Number, Programme Name
and Sound Indicator are displayed on
screen after programme change for 3 sec-
onds.
Programme Number
Programme Name (5 characters)
These OSD’s are displayed when a new pro-
gramme is entered by digit button, by press-
ing the “P<P”, “TV”, “
CH” / “P/CH+” buttons.
Previous Programme
• Pressing "P<P" (Previous Programme) but-
ton consecutively allows to swap between
the last two programmes.
For example, select programme 8, then select
programme 2. Now, if you press the “P<P”
button, programme 8 will be displayed. If you
press the same button again, programme 2
will be displayed and so on.
Sound Indicator
“I-II” button is used to select Mono, Stereo,
Dual I or Dual II.
” buttons or the “-P/
Advertisement
Table of Contents
