Installing The Turbocharger; Inserting Gaskets - ABB Turbocharger A130-M Original Assembly Instructions

Assembly Instructions / A130-M.. - A145-M
4 Installing the turbocharger / 4.1 Inserting gaskets
4

Installing the turbocharger

4.1

Inserting gaskets

CAUTION
Inserting the gaskets
Gaskets that are forgotten, damaged or improperly inserted will lead to oil
leaks.
Always use new gaskets and insert them carefully into the slot.
u
The oil is supplied (02) and drained (03) through the bracket (01).
The necessary sealing is provided by O-rings. The O-rings are not included in the ABB scope
of delivery.
01 Bracket
02 Oil supply
03 Oil drain
Pin (06) as installation safety device
Turbochargers can have an oil inlet either on their right or left side; the oil inlet position can
be different for the turbocharger fitted on the left and on the right engine bank.
A pin can be installed in every support as an installation safety device to prevent inadvertent
incorrect fitting. This pin fits into the respective slot on the foot of the bearing casing. In-
structions of the enginebuilder must be observed.
© Copyright 2020 ABB. All rights reserved.
04 Slot for O-ring
05 O-rings
06 Pin (optional)
HZTL455311P0005_EN Rev.B July 2020